Bedienungsanleitung Panasonic SCHTX5 (Seite 26 von 28) (Englisch)

618350

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9478

Before requesting service, make the following checks.

If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your

dealer for instructions.

Troubleshooting guide

Problem Possible solution Pages

No power. • Ensure the AC mains lead is connected. 13

No sound or image after

playback starts.

• Select the correct source.

• Turn the muting off.

• Check that the digital signals can be decoded by this system.

With the digital connection, cannot playback PCM signal with sampling

frequency of over 96 kHz.

• Check connections to other equipment.

• When using SH-FX70 (not included), check the connections of the digital

transmitter and surround speakers.

• Set “AUTO ” in “Switching the input signal detection setting”.

• Turn this system off then on again.

• Output the test signals of speakers and adjust the speakers.

• Check the connectors of speaker terminals on the rear panel (ampliﬁ er) are

properly connected.

• If the connections are normal, this may be a cable-related problem. Use other

cables and make connections again.

10 to 13

—

15, 20

—

The remote control does

not work.

• Replace the batteries if they are worn.

• Make sure the remote control code has been properly set.

No sound from microphone

connected to DVD player

(karaoke).

• No sound is output from microphone if this system is digitally connected

with DVD player. Change to analogue connection and input. Make analogue

connection to AUX4.

12, 13

There is no DTS audio

output. There is audio

output, but the DTS

decoder indicator is not lit.

• Set the DTS Digital Audio Output setting on the DVD player, Blu-ray Disc

player or DVD recorder to Bitstream.

• Set “DTS ” in “Switching the input signal detection setting”.

—

Sound is not heard when

playing DVD audio.

• This may occur due to digital copyright protection of the disc if using digital

connection. This system may not be able to play sources with sampling

frequency of over 48 kHz.

—

Sound stops.

(“F61 ” appears on the

display for about a second.)

The protection circuit

is activated when some

abnormality is detected,

and turns off the system

automatically.

• Ampliﬁ er output is abnormal.

• Straining of the speakers through excessive volume or power.

• This may occur if you use the system in an extremely hot environment.

• Curtains or other objects may be blocking the exhaust hole.

D Determine and correct the cause, then turn the system on.

(The protection circuit is reset.)

(Consult your dealer if the problem persists.)

—

“F70



” appears on

the display.

(“DSP ” or “HDMI ” is

displayed in



• Turn off the system, unplug the AC mains lead, and consult your dealer. —

“F76 ” appears on the

display.

(After displayed, the system

turns off.)

• Unplug the AC mains lead, and consult your dealer. —

No sound in surround

mode.

• Set to Dolby Virtual Speaker, SFC or Dolby Pro Logic

• (When the audio is not heard from TV) Check if this system is connected to

TV with the optical ﬁ bre cable or the stereo phono cable, etc. properly.

10 to 12,

Cannot use Dolby Virtual

Speaker, Dolby Pro Logic

or SFC.

• You cannot use these features with PCM signals with sampling frequency of

over 48 kHz. Make analogue connection to AUX4.

• You cannot use for Dolby Digital dual sounds.

12, 13

—

When using an HDMI

connection, the ﬁ rst few

seconds of sound is cut off.

• This may occur if you start play from a chapter on a DVD. The following will

correct the problem.

1 Change the audio output setting on the Blu-ray Disc player, DVD recorder or

DVD player from Bitstream to PCM.

2 Change input signal setting to “PCM ” in “Switching the input signal detection

setting”.

—

The system does not work

properly.

• The system does not work properly if you have connected the HDMI input and

output terminals incorrectly. Turn the system off, unplug the AC mains lead,

and make the connection again.

Common problems

Sound ﬁ eld

HDMI

Troubleshooting and

other information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHTX5 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHTX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info