61261
48
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
48 CHAPTER A: TELEPHONE INSTALLATION AND MAINTENANCE
Manually Configuring
Telephone
Connectivity
To configure the IP configuration settings manually on your telephone,
use the Program button (see Buttons and Controls
) to enter the User
Configuration menu (menu option 6).
If your telephone received its IP configuration automatically, follow steps
1 through 3 to set the IP address of the 3Com Asterisk Appliance and
your user settings. If your telephone did not receive its IP configuration
automatically from a DHCP server, follow all the steps.
1 Press Program + 5 (Advanced Settings) + 1 to select Set Primary PBX IP.
Use the keypad to set the IP address of the 3Com Asterisk Appliance.
2 Press Program + 5 (Advanced Settings) + 2 to select Set Secondary PBX
IP. Use the keypad to set the IP address of the telephone download
program server, which is the same as the IP address of the 3Com Asterisk
Appliance.
3 Press Program + 5 (Advanced Settings) + 4 to select Set My Phone
Number. Use the keypad to specify the telephone extension. Your
administrator must also configure the extension on the 3Com Asterisk
Appliance.
4 Press Program + 6 (User Configuration) + 2 to select Configure IP
Address. Use the keypad to set the IP address for the telephone, and then
press the # key to save your changes. Note that you can press the
Program button to back out of a menu choice.
5 Press Program + 6 (User Configuration) + 3 to select Configure
SubNetMask and set your network’s subnet mask. Note that you can
press the Program button to back out of a menu choice.
6 Press Program + 6 (User Configuration) + 4 to select Configure Gateway
IP Address and set your telephone’s default gateway address. Note that
you can press the Program button to back out of a menu choice.
7 Press Program + 6 (User Configuration) + 5 to select Configure NCP IP
Address and set the 3Com Asterisk Appliance IP address. Note that you
can press the Program button to back out of a menu choice.
8 When you are finished, press the Program button to exit from the
configuration menu.
After you manually configure a telephone, the settings are saved in flash
memory and retained when you disconnect power from the telephone.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für 3com 3101 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info