Bedienungsanleitung 3Dprintingsystems UP Plus (Seite 5 von 56) (Englisch)

534678

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

UP Plus

3D Printer User Manual

1. I

ntroduction

1.1 How

to use this

This User Manual

is divided into four sections which cover

and Troubleshooting.

Please

according to these

instructions

1.2 Precautions

Please read this section

carefully before using the printer

1.2.1 Safety

The printer can only be

used with

may be damage

d, with a risk of

To avoid burning,

or model deformation, d

or any other

part of the body

printing.

Protective glasses should always be worn when removin

The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please

do not hold the extruder block with the gloves.

There is a slight smell from ABS when it is being extruded. The smell is,

pleasant. Operate in a

well ventilated room

prints. When ABS is burnt is releases toxic fumes.

Do not use ABS plastic or its printed parts near any kind of heat source, flames,

incense, light bulbs, rockets

etc. ABS will catch fire and burn a thick black smoke.

Always have adult supervision when children are present. Please keep all small printed parts away

from young children, choking hazards! There are sever

HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose

clothing. Keep fingers away from moving parts.

Tools and parts should

be stored at a suitable height away from sm

Tools should be used in conjunction with safety gloves

3D Printer User Manual

v 2013.6.10

ntroduction

to use this

manual

is divided into four sections which cover

the

Introduction, Overview, Operation,

Please

study this manual carefully before installation,

and

instructions

. Keep this manual handy and refer

to it when necessary.

carefully before using the printer

used with

the power adapters

supplied by this company, or

d, with a risk of

fire.

or model deformation, d

o not touch the model, nozzle, or the platform by hand

part of the body

, while the printer is working or

immediately after it has

Protective glasses should always be worn when removin

g support material, especially PLA.

The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please

do not hold the extruder block with the gloves.

There is a slight smell from ABS when it is being extruded. The smell is,

however, not too u

well ventilated room

but draught free. D

raughts can affect warping of ABS

prints. When ABS is burnt is releases toxic fumes.

Do not use ABS plastic or its printed parts near any kind of heat source, flames,

fireworks, candles,

etc. ABS will catch fire and burn a thick black smoke.

Always have adult supervision when children are present. Please keep all small printed parts away

from young children, choking hazards! There are sever

al safety issues, small tools, sharp tools and

HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose

clothing. Keep fingers away from moving parts.

be stored at a suitable height away from sm

all children.

Tools should be used in conjunction with safety gloves

and glasses.

Overview

Introduction, Overview, Operation,

and

use the printer

to it when necessary.

supplied by this company, or

the product

o not touch the model, nozzle, or the platform by hand

immediately after it has

finished

g support material, especially PLA.

The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please

however, not too u

raughts can affect warping of ABS

fireworks, candles,

etc. ABS will catch fire and burn a thick black smoke.

Always have adult supervision when children are present. Please keep all small printed parts away

al safety issues, small tools, sharp tools and

HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

3Dprintingsystems UP Plus Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info