Bedienungsanleitung 3m MP8650 (Seite 12 von 32) (Englisch)

5569

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

 3M 1997

3M Multimedia Projector MP8650

RS-232C Serial Cable/Mouse Receiver Connection

The MP8650 remote control transmitter can be used to control the mouse button functions on your personal

computer (requires serial cable included) or Apple Macintosh type computer (requires Apple Macintosh mouse

receiver which is an accessory).

n Note

Always power down your PC or Apple Macintosh

computer before making any cable connections.

PC Computer: Install the serial cable (Figure 3-8) to connect the serial mouse port on your computer to the

RS-232C terminal on the MP8650 projector. A serial mouse driver must be loaded on your PC computer for

this function to operate properly. It is best to reference the operating instructions for your computer before

connecting an external mouse device of any kind.

To load a serial mouse driver on a computer using Microsoft Windows or Windows for Workgroups, go

into the Windows Setup function. From Program Manager click Main; then click Windows Setup; (note

the current mouse driver that is loaded); click Options; click Change System Settings. Choose Mouse. You

will need to have the Serial Mouse on Comm 1 driver loaded. It will most likely be listed as Serial or Bus

Mouse. Click OK to apply the serial mouse driver. Restart Windows if prompted.

Hint

: To load a serial mouse driver on a computer using MicrosoftWindows95, go into the Control Panel.

Click Start; select Settings; select Control Panel. Click on Mouse; select the General tab; (note the current

mouse driver that is loaded); select Change; select Show all compatible devices; (note the current

Manufacturer and Model); select Standard Mouse Type for Manfacturer; select Standard Serial Mouse.

Click OK to apply the serial mouse driver. Restart windows when prompted.

PC Serial

Mouse Port

Projector

RS232C

Terminal

PC Serial Cable

Figure 3-8. PC Serial Mouse Cable

n Note

Operating the mouse functions through the

MP8650 remote control may disable the internal

pointing device (IPD) on your computer. It is

recommended that you review the operating

instructions for your computer before connecting

an external device of any kind.

See Technical–Appendix for RS32 Serial

Command Codes.

Apple Macintosh: Power off the computer then disconnect the current mouse cable. Now connect the mouse

receiver plug to the computer mouse port (Figure 3-9).

The Apple Macintosh computer mouse can be hooked into the loop allowing both the computer mouse and

MP8650 remote control transmitter to operate the computer mouse button functions. After the mouse receiver

is connected to the mouse port, connect the mouse cable to the mouse receiver plug.

Mouse Port

Mouse Cable

Figure 3-9. Apple Macintosh Mouse Receiver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

3m MP8650 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von 3m MP8650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info