Bedienungsanleitung 3m MP8660 (Seite 3 von 38) (Englisch)

5571

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

E 3M 1997

3Mt

Multimedia Projector MP8660

Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3Mt Multimedia

Projector MP8660 was designed, built and tested for use indoors, using 3Mt brand lamps and

nominal local voltages. The use of other replacement lamps, outdoor operation or different

voltages has not been tested and could damage the projector or peripheral equipment and/or

create a potentially unsafe operating condition.

IMPORTANT SAFEGUARDS

1. Read and understand all instructions before using. Pay particular attention to areas where this

symbol

is shown.

WARNING – Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

Caution – Indicates a potentially hazardous situation which, if not avoided, could result

in minor or moderate injury. It may also be used to alert against unsafe practices.

2. Close supervision is necessary when any appliance is used by or near children. Do not leave

appliance unattended while in use.

3. Never look directly into the projector lens when the lamp is on. The metal halide lamp produces

a strong light which could damage your eyesight.

4. Care must be taken as burns can occur from touching hot parts.

5. Do not operate appliance with a damaged cord or if the appliance has been dropped or

damaged — until it has been examined by a qualified service technician.

6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

7. If an extension cord is necessary, a cord with a current rating at least equal to that of the

appliance should be used. Cords rated for less amperage than the appliance may overheat.

8. Always unplug appliance from electrical outlet before cleaning and servicing and when not in

use. Grasp plug and pull to disconnect.

9. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

10. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified

technician when service or repair work is required. Incorrect reassembly can cause electric

shock when the appliance is subsequently used.

11. The use of an accessory attachment not recommended by the manufacturer may cause a risk of

fire, electric shock, or injury to persons.

12. Connect this appliance to a grounded outlet.

13. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

14. Keep ventilation openings free of any obstructions.

15. Always remove the lens cap when the projection lamp is on.

16. The projection lamp contains mercury. Always dispose of it in a proper manner according to

local regulations.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M MP8660

Multimedia Projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

3m MP8660 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von 3m MP8660

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info