Bedienungsanleitung 3m MP8790 (Seite 32 von 44) (Englisch)

5599

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

OPTION Menu

With the OPTION menu, the five items shown in the Table below can

be performed.

Please perform each operation in accordance with the instructions in

the Table.

WIRELESS Menu

The WIRELESS menu is only enabled if the wireless function is enabled. Using the

wireless function requires a Wireless & Network Module Terminal (sold separately). See

the Wireless & Network Module Terminal user’s manual for more information about the

WIRELESS menu. Contact your local dealer for more information about the wireless

function and Wireless & Network Module Terminal.

: SELECT

MAIN

PICTURE-1

PICTURE-2

INPUT

AUTO

SCREEN

OPTION

WIRELESS

VOLUME

WHISPER

IR REMOTE

LAMP TIME

FILTER TIME

Item Description

VOLUME

Adjust Volume: High Low

WHISPER

Select WHISPER Mode:

NORMAL WHISPER

When WHISPER is selected the WHISPER mode is activated. In the WHISPER

mode, acoustic noise and screen brightness are reduced.

IR REMOTE

Selecting the remote control receiver:

The unit has 3 remote control receivers, as shown in the figure

to the right (1, 2, and 3). You can select which of them to

activate (“v” in the figure), and which to disable.

• The ambient lighting and other factors may prevent the

remote control operation from functioning properly. If this

happens, use this function to disable receivers being

impacted by unneeded light.

LAMP TIME

Refer to LAMP TIME: When set, this function displays the total time the

projector lamp has been used since new.

Reset LAMP TIME [Use this function only when the lamp has been replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being

displayed. The reset menu will then appear. After you replace the lamp with a

new lamp, select RESET on the menu with the button.

• Do not reset the lamp time unless you have replaced the lamp. And, always

reset the lamp time when replacing the lamp. The message functions will not

operate properly if the lamp time is not reset correctly.

•

Before replacing the lamp, carefully read the descriptions headed "THE LAMP".

FILTER TIME

Refer to FILTER TIME: This function displays the total time the air-filter has

been used since new.

Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being

displayed. The reset menu will then appear. After you replace the filter, select

RESET on the menu with the button.

RESET CANCEL

• Do not reset the filter time unless you have cleaned or replaced the filter. And,

always reset the filter time when cleaning or replacing the filter. The message

functions will not operate properly if the filter time is not reset correctly.

•

Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".

Example : OPTION Menu

(VOLUME)

OPTION Menu

12 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

3m MP8790 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von 3m MP8790

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info