Bedienungsanleitung 3m x66 (Seite 11 von 16) (Englisch)

215949

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

3M™ Multimedia Projector X66 Product Safety Guide© 3M 2007 11

ENGLISH

• To reduce the risk associated with exposure to hazardous voltage:

- Disconnect power cord when the projector is not in use, during lamp replacement,

and while cleaning.

'RQRWUHPRYHDQ\VFUHZVRWKHUWKDQWKRVHVSHFL¿HGLQWKHODPSUHSODFHPHQWLQVWUXFWLRQV

- Do not attempt to service the projector - there are no user serviceable parts, other

than the lamp cartridge, inside the projector. Contact a 3M authorized service

provider for service.

• To reduce the risk associated with hot surface of lamp cartridge:

- Unplug the projector from the electrical outlet and allow the lamp to cool for 45

minutes before replacing the lamp.

• To reduce the risk associated with a ruptured lamp:

- Always handle the fragile lamp module with care.

- Remove the projector from the ceiling or wall mount before replacing the lamp. In

the case of a lamp rupture, small glass particles could fall out when the lamp door

is opened or the projector is tilted.

- Use care when replacing the lamp module in the event of a lamp rupture - small

glass particles and small amounts of mercury may be present.

- Ventilate the area where the lamp rupture occurred.

- Wear safety goggles and gloves when cleaning up ruptured lamp debris.

- Carefully collect the ruptured lamp debris in a closed container and dispose of

the container and the expired lamp module in accordance with federal, state, and

local regulations.

- Wash your hands thoroughly after handling ruptured lamp debris.

- Replace the lamp module when the lamp replacement message appears.

- Never replace the lamp module with a previously used lamp module.

• To reduce the risk associated with environmental contamination due to

mercury in the projection lamp:

Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.

The lamp in this product contains mercury. Dispose of projection lamp in a manner

that is consistent with your local hazardous waste regulations for mercury.

- For recycling and disposal information, contact your respective governmental

agencies.

In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at

www.lamprecycle.org

In Canada, contact 1-800-364-3577 (3M Canada)

WARNING

The glass lamp used in this projector contains small amounts of mercury and operates at

high pressure and at high temperature and may unexpectedly shatter. Each lamp has a

different lifetime and can fail in different ways, including a rupture with a loud bang or

simply burn out. In the event of a lamp rupture, be sure to follow the instructions.

Replacing Lamp

Important Note:

,IWKHODPSEUHDNVVRRQDIWHUWKH¿UVWWLPHLWLVXVHGLWLVSRVVLEOHWKDWWKHUHDUHHOHFWULFDOSUREOHPV

elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

3m x66 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von 3m x66

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info