Bedienungsanleitung A.Caminetti SCANDINAVIAN series (Seite 5 von 14) (Englisch)

813874

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

A.caminetti wood-burning stoves have been tested and approved by testing institutes in accordance with

applicable law. Prior to final approval, the stoves are subjected to various fire technical tests. Your wood-

burning stove has been tested with a top outlet. Birchwood with 12 - 20% humidity was used during the

testing.

You should ensure that your stove is installed in accordance with applicable codes, regulations and safety

distances for combustible material. All A.caminetti dealers will be happy to tell you about the requirements

applying to your specific stove and give you further instructions on its correct installation. Furthermore,

your dealer / chimney sweep may tell you exactly which type of chimney you need to choose.

You should ensure that sufficient combustion air is delivered to the stove, also with the simultaneous use

of other heating or exhaustion devices. The insulation of contemporary homes is often so good that fresh

air valves are necessary to supply fresh air from outside. If you home is fitted with fresh air grates, any

blocking of these must be prevented.

Furthermore, you should check if the vermiculite plating is fitted correctly in the fire chamber. Please refer

to the illustration in this manual for positioning instructions.

To prevent the risk of fire, the heater must be installed in compliance with the rules and

regulations of good building practice, and with the technical guidelines provided in this

Installation and Operation Manual. The design of the chimney system must be by a qualified

specialist. Prior to commissioning, a recorded technical acceptance must be conducted and the

chimney sweep and fire-specialist assessments attached.

a)Prior to the heater’s installation, the chimney flue must be assessed by an expert and

accepted for its technical specifications, as well as the technical functionality of leak tightness

and flow capacity.

b)The installation and startup of the heater must be carried out by an installation-specialist

company with satisfactory qualifications and experience.

c)The heater must be placed as close to the chimney flue as possible. The room it will be

installed in must have a functional ventilation system and the required amount of air for correct

heater operation.

d) Before you start using the heater, remove the stickers from the glass.

e)The heater’s technical specifications apply to the fuel defined herein.

f) ) The chimney flues must be inspected in the due time (min. twice a year).

g) Pursuant to the applicable law, a stove may not be the only source of heat, but a

supplementary one to the existing heating system only. The purpose of such a regulation is the

necessity to provide heating for buildings during a prolonged absence of residents.

The heater’s installation must be performed with adherence to the provisions in force within this

standard scope, construction-law requirements and fire-safety standards in force in this regard.

The particular provisions on design safety, fire safety and safety of use are laid down in the

construction regulations and codes in force in the respective countries.

INSTALLATION

NOTE BEFORE INSTALLATION!!!

GENERAL REMARKS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

A.Caminetti SCANDINAVIAN series Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von A.Caminetti SCANDINAVIAN series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info