Bedienungsanleitung A.O. Smith ADMR115 (Seite 56 von 96) (Englisch)

503237

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Main menu

56 Instruction manual ADMR

gis

The appliance's default week program switches the

appliance on every day at 00:00 and off at 23:59. The

default water temperature setting is 65 °C.

If you want, you can change every setting in the

appliance's standard week program.

If the water temperature becomes too low while the

week program is running, the appliance will run

through the heating cycle (9.2 "The appliance's

heating cycle") and return to the week program.

This following are discussed:

• Starting and stopping the week program

;

• Changing the appliance's standard week program

;

• Adding times to a week program;

• Deleting times from a week program

11.4.1 Starting and stopping the week

program

The week program can be started up from any other

operating mode, as follows:

1. :

WEEK PROGRAM

START OPERATION

Confirm with .

A week program can be shut down simply by

activating a different operating mode, for example the

"ON mode".

11.4.2 Changing the appliance's standard

week program

Note

First fill-in the desired week program on the

supplied week program card.

A week program is made up of a number of

programmable periods in which you can have the

appliance switch on and off. A period consists of:

• switch-on time: day of the week, hours and

minutes:

• switch-off time: hours and minutes;

• the water temperature setting;

• on/off setting for a program-controlled pump.

Note

The switch-off time must always be followed by a

switch-off time on the same day of the week. A

maximum of three periods may be programmed per

day. You can program a maximum of 21 periods.

Call up the menu for the week program as follows:

• :

WEEK PROGRAM

PROGRAM OVERVIEW

Confirm with .

The display shows the menu for the week program,

see the figure below. With the default setting, the

program switches on and off every day at 00:00 and

23:59 hours respectively, the water temperature is

65 °C and the pump is switched on (

Example

As an example, we will set the switch-on time for

Sunday to 08:15 hours, and the matching switch-off

time to 12:45 hours. The water temperature will be set

to 75 °C and the pump will run continuously.

The following settings are entered one by one via the

menu: the switch-on time, the switch-off time, the

desired water temperature, and the mode of the

program-controlled pump.

Week program: setting the switch-on time

1. Bring the cursor to

Confirm with .

The day indicated by

flashes.

2. Use and to set the desired day. In the example

this is

(Sunday).

Confirm with .

The cursor moves to the hour digits, which flash.

WEEK PROGRAM

START OPERATION

^»PROGRAM OVERVIEW

DAY TIME Tset

ON »SU 00:00 65ÉC P

OFF SU 23:59

ON MO 00:00 65ÉC P

OFF MO 23:59

ON TU 00:00 65ÉC P

OFF TU 23:59

ON WE 00:00 65ÉC P

OFF WE 23:59

ON TH 00:00 65ÉC P

OFF TH 23:59

ON FR 00:00 65ÉC P

OFF FR 23:59

ON SA 00:00 65ÉC P

OFF SA 23:59

INSERT

DELETE

START OPERATION

ON »SU 00:00

OFF SU 23:59

Tset 65ÉC

PUMP ON SAVE

ON SU»00:00

OFF SU 00:59

Tset 65ÉC

PUMP ON SAVE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

A.O. Smith ADMR115 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von A.O. Smith ADMR115

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info