Bedienungsanleitung AAS Lounge Lizard EP-4 (Seite 26 von 55) (Englisch)

541312

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

26 Parameters

the tine has the same effect on the spectrum of the sound as moving it above by the same amount.

The Symmetry parameter is also adjustable from the Play view.

The Distance knob sets the horizontal distance between the pickup and the tine bar. Turning

this knob clockwise, increases this distance and moves the pickup away from the tine. Note that

the sound becomes more distorted (overdriven) as the pickup is moved closer to the tine.

The Lounge Lizard EP uses two different types of pickups in order to expand the tonal possibil-

ities of the instrument. The Type switch is used to select the type of pickup types used by Lounge

Lizard EP. In the R position, Lounge Lizard EP uses a model of electro-dynamic pickups such as

found in Rhodes

pianos. In the W position, the model used is that of an electro-static pickups

such as found in Wurlitzer

pianos.

The Input knob is used to adjust the amount of signal from the fork going into the pickup

which will affect the amount of distortion applied to the signal by the pickup. As the knob is

turned clockwise, the amount of input signal increases. The Output knob controls the amount of

signal from the pickup and sent to the effect section. As the knob is turned clockwise, this amount

increases. Note that the Output signal can be modulated with the pitch of the note played by using

the Key knob. Turning this knob to the left will increase the output amplitude of low notes relative

to high notes while turning the knob to the right will have the opposite effect and increase the

relative amplitude of high notes. In its center position, the output amplitude is uniform across the

entire keyboard.

One can obtain different sounds with different settings of the Input and Output parameters. For

example, a small amount of input with higher amount of output will produce a cleaner sound then

a large amount of input with small output value.

5.2.4 The Damper Module

The Damper module simulates the production of noise when dampers are raised from or applied

on the fork when a key is depressed or released. This gives a more realistic and lively sound.

The Amount knob is used to set the amplitude (volume) of the damper noise present in the ﬁnal

sound. Turning the knob clockwise increases the presence of the damper noise in the ﬁnal sound.

The Tone knob is used to adjust the stiffness of the dampers. When in its

leftmost position, the dampers are soft producing a more mellow sound. Turn-

ing the knob clockwise increases the stiffness of the dampers and the center

frequency of the noise produced by the damper.

Finally, the Att Rel knob is used to control the amount of noise introduced

by the dampers at the beginning or end of a note when the dampers are either

lifted from the fork or applied on the fork. When turned to the left, in the Att position, noise will

be introduced in the sound during the attack phase of notes while in the Rel position, noise will be

added during the release phase of notes. In its center position, an equal amount of noise will be

added both during the attack and release phases of notes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Lounge Lizard EP-4 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info