Bedienungsanleitung AAS Strum Acoustic Session (Seite 50 von 77) (Englisch)

541318

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

50 Parameters

the current bar number and current beat within this bar. When a loop is loaded in the player, it is

possible to scan the loops in the same folder using the skip forward and skip backward buttons.

The loops are scanned in alphabetical order starting from the currently loaded loop.

Once a loop has been selected, it might be necessary to modify it. A loop can rapidly be

exported to the MIDI track of a sequencer by using the Drag MIDI button. To export the loop,

click on the Drag MIDI button, then drag-and-drop the ﬁle onto a MIDI track of a sequencer.

Strum Session is supplied with a library of MIDI loops which you can use to easily start creating

a new piece. The factory setting for the default MIDI loop folder is the folder where the library

was ﬁrst copied when Strum Session was installed.

6.5.4 Strumming

The Strumming section includes parameters which are used to determine how

the strumming is performed. The Speed parameter controls how rapidly the dif-

ferent strings are played when a strum is triggered. The speed of the strum is

increased by turning the knob clockwise. This parameter can be modulated by the

keyboard velocity using the Velocity knob. When in its center position, the speed

is always that corresponding to the value of the Speed knob. Turning the velocity

knob clockwise increases the strumming speed for high keyboard velocities while

it reduces the speed for low keyboard velocities. Turning this knob below its mid-

dle position has the opposite effect; playing softly on the keyboard will increase

the strumming speed while playing hard will reduce the speed.

The Auto button is used to switch on or off the Auto-Strum mode. When this mode is on, notes

and chords will played by Strum Session as they are played on the keyboard. When Auto-Strum

mode is off, chords are recognized and voiced by Strum Session but the strings are not triggered

until strumming keys are used. For more details on how to use the strumming keys, please refer to

section 3.2. Note that, as was mentioned in section 6.5.2, when the Auto-Strum mode is on, Strum

Session introduces a delay between the time notes are played on the keyboard and a the time a

chord is actually triggered. This delay is adjusted using the Time knob from the Chord section and

is necessary in order to take into account that notes in a chord are not necessarily played perfectly

simultaneously.

The Range parameter located below the chord display is used to determine the range of strings

which will be played when a strum is triggered. The lowest and highest strings played when

triggering a chord are speciﬁed by click-dragging the cursors located at each extremities of the

display. Note that the range must contain at least one string.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Strum Acoustic Session Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info