Bedienungsanleitung AAS Tassman 4 (Seite 48 von 177) (Englisch)

541310

Zoom out

Zoom in

Vorherige Seite

1/177

Nächste Seite

The Tassman Builder 48

3 The Tassman Builder

The Tassman Builder is used to create instruments. Constructing instruments is very easy and

straightforward. One ﬁrst drags modules from the Modules section of the Browser and then con-

nects them together in order to create a patch. Modules are units that either produce or transform

sound in a particular manner. They each have a certain number of inputs and outputs which are

used to transmit signals from one module to another and which can be interconnected by using

wires . The Player view is then displayed to play instruments that have been made with the Builder.

The different modules of the library are just like building blocks that can be connected to other

blocks any way you desire. The only limit is your imagination! Of course creating instruments

implies a certain amount of experimentation, but that is part of the fun! You can start with simple

instruments, trying them right away with the Player, and then come back to the Builder to modify

the patch. Very rapidly you will be able to construct the instruments you have always dreamed of.

And that’s not all! The architecture of the Tassman is entirely modular, which makes it a

powerful evolutionary creation tool. As you create patches, you can save them as sub-patches and

then reuse them in another patch just like any other elementary module. Very rapidly your library

will expand and contain many different types of instruments and synthesizers.

When you save an instrument, the Builder creates an entry in the Browser under the Instruments

folder describing the patch you have just made. This information contained in this ﬁle is used by

the Tassman to generate the instrument front panel and the computation code necessary to simulate

the instrument. These instrument ﬁles are very light and can be exchanged with other users (using

the Export/Import command) via e-mail. Check the Applied Acoustics Systems website often for

new instruments to download.

3.1 The Builder area

The Builder is divided into two different areas: the construction area and the help area. The

Browser contains the module library.

The library area

The module library, included in the Browser, contains the different modules of the library. The

modules are divided into eleven categories: Effects, Envelopes, Filters, Generators, In/Out,

Logic, Mixers, Resonators, Routing, Sequencers and Sub-patches. The different sections are

selected by clicking on the corresponding folder in the Browser, to open a section, click on the sign

at the left of the folder, this will display the list of modules contained in the folder.

The construction area

The construction area is where you build your patch. After dragging modules from the module

section of the Browser, you connect them with wires using the mouse.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Tassman 4 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info