Bedienungsanleitung AAS Tassman 4 (Seite 54 von 177) (Englisch)

541310

Zoom out

Zoom in

Vorherige Seite

1/177

Nächste Seite

3.5 Using Sub-Patches 54

folder. When you double-click on it, the Builder will be displayed. Sub-patches can be included

in other patches saving you the trouble of redoing the patch again. The only difference between

a an instrument and a sub-patch is that a sub-patch, like any other elementary module from the

library, has inputs, or outputs, or both, so that it can be connected to another patch. To create a new

sub-patch:

• Choose an Inlet or Outlet module or both in the In/Out folder of the Browser and place

them in the construction area. A sub-patch module may have between 0 and 12 inputs and

between 0 and 12 outputs, but it must always have at least one input or one output.

• Determine the inputs of your patch which you will be using to connect this patch to another

one. These inputs will appear on the sub-patch icon as the inputs of the Sub-patch module.

Connect the inputs you have chosen in your patch to the outputs of an Inlet module (Inlet

1-12 depending on the number of inputs of the new module).

• Determine the outputs of your patch which you will be using to connect this patch to another

one. These outputs will appear on the sub-patch icon as the outputs of the Sub-patch module.

Connect the outputs you have chosen in your patch to the inputs of an Outlet module (Outlet

1-12 depending on the number of outputs of the new module).

• Use the Save (or the Ctrl-S/Apple-S shortcut) or Save As command from the File menu.

Since you have at least one Inlet or Outlet in your patch, the Builder will automatically save

this patch in the Sub-Patches folder in the Browser.

It might be useful to document a sub-patch so that you will have a reminder of its purpose or

functioning when you use it in another patch. To have text appear in the help area of the Tassman

Builder when you select a sub-patch.

• In the browser, right-click/control-click on the sub-patch icon and select SubPatch Info

from the menu. Fill the required ﬁelds and they will appear in the help area when you click

on the module in the Builder.

• You can also change the names of the inputs or outputs which appear when you position

the mouse on the inputs or outputs of the Inlet, Outlet or Sub-Patch module in the inlet or

outlet text ﬁeld. To do so double-click on the Inlet or Outlet of the sub-patch.

Including a Sub-Patch

Once you have deﬁned a certain number of patches as new modules, you can reuse them in other

patches.

• In the Browser, open the Sub-Patches folder and drag and drop the sub-patches you want in

the construction area just like any other module.

• To view the patch inside a sub-patch module, select it and choose the Open Sub-patch

command from the File menu of the Builder. You can also right-click (PC) or Ctrl-click

(Mac) on the module and choose Open sub-patch from the contextual menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Tassman 4 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info