14
EN: Installation manual for Gewa Andromeda IR-
REC8 BED
1. Important information
An electric adjustable bed, wirelessly controlled by an IR transmitter, may cause
personal injury if installed or used incorrectly.
The following precautions should be made:
2. Important information to the installation engineer
Use only non-latching (momentary, monostable) control.
Do not use macro functions on the IR transmitter.
If the user experience difficulties at a certain bed angle, for instance difficulties
in breathing, the minimum/maximum angle should be limited.
Keep good ventilation for the power adapter in use to prevent it from
overheating. Also a 10-15 cm clearance must be kept from heat sources.
If the equipment is not used for long period of time, disconnect the power
adapter to avoid being damaged by voltage peaks or lightning strike.
Risk of electrical shock and energy hazard. All failure should be examined by a
qualified technician. Please do not remove the case of the power adapter by
yourself! The openings should be protected from foreign objects or dripping
liquids.
Please do not put the power adapter in places with high moisture or near the
water.
Disconnect the power adapter from the AC power before cleaning. Do not use
any liquid or aerosol cleaner. Only use a damp cloth to wipe it.
For other information about the power adapter, please refer to
www.meanwell.com for details.
The installing engineer shall give the following information to the user and
assisting personnel.
3. Important information to the user and assisting personnel
For best functionality of IR communication it needs to be clear sight between
the IR transmitter and IR receiver.
The IR receiver does not work on power failure.
