Bedienungsanleitung Abilia 808400 - IR-2ML (Seite 2 von 4) (Deutsch, Englisch, Französisch, Schwedisch)

677234

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

2 3 1 2 1 2

2 3 4

Re 2

Switch 3 for monostable or bis-

table function (switch to "on" for

bistable function)

Switch 4 for public or normal

function (switch to "on" for pu-

blic function)

Re 1

Supply Voltage: 12 - 24 V stabilized DC

or 24 V AC

Yellow

Green

White

Red/brown

Programming buttons for

realys 1 - 2

Detector inputs

Yellow

Green

White

Red/brown

Detector

How to use IR-2ML with vari-

ants

Description

IR-2ML (incl variants) is a two-channel programmable IR receiver

with two voltage-free alternating relay switches. The receiver can

be programmed with all GewaLink channels, 4096 codes and Infra-

code. Alternatively the receiver can be set in a position where the

relays are activated irrespective of which channel is transmitted

(Public Function). The receiver relays can independently be set for

bistable (latching) or monostable (nonlatching) function.

Mounting

Snap o the lid and unscrew the frame from the base plate. Dis-

connect if necessary the detector cable so that the lid with the

detector is not in the way when the receiver is connected. Fasten

the base plate to the wall with the screw and connect all leads to

the circuit board.

Detector Connection

The wires are colour-coded. Connect the wires as in the gure. If

older types of detctors with only 3 wires will be used the receiver

must be modied. (Please contact GEWA for more information). Be

careful when connecting the leads! Making the wrong connection

may damage the equipment. It is possible to connect up to two

detectors.

Relay Connection

The receiver has two voltage-free alternating relay switches which

are connected to terminal blocks Re 1 and Re 2. See technical data

for max relay load. When connecting inductive load for instance

motors and relays, an interference suppression device should be

used.

Supply Voltage

Connect the power supply to the connection block between Re 1

and Re 2. The supply voltage for the receiver should be 12 - 24 V

stabilized DC (-5% +20%) or 24 V AC (+/- 20%). When using DC, note

the polarity.

Bistable Function

Use switch 3 to get a monostable or a bistable relay function. Switch

to "ON" for a bistable function and to "OFF" for a mono-stable fun-

ction.

Public Function

Public function means that the receiver accepts all transmitted chan-

nels within the GewaLink system, 4096 codes or Infra-code irrespec-

tive of which channel or code is transmitted. A channel or a code

(any channel or code can be used) must however be programmed

before the public function can be used. This function can be useful in

situations when it isn´t necessary for the user to keep track of which

channel is used for a certain function. NOTE! This function cannot be

used if there are more receivers within a visible area because all the

receivers will be aected at the same time. Choose public/normal

function by means of switch 4. Switch to "ON" for public function and

to "OFF" for normal function.

Programming

Decide whether the relay is to have a bistable or a monostable

function by using switch 3 on the printed circuit board. Then

decide whether the relay is to have normal or public function by

using switch 4. Press the transmitter channel which you want to be

programmed at the same time as you press programming button 1.

The receiver relay is activated and the indicator lamp ashes twice

thus conrming the programming. Relay 1 is now programmed.

Do the same thing for the second relay of the receiver but this time

using programming button 2 and another transmitter channel and

so on. If you are not satised with the selected channel repeat the

process. Warning! The actual relay is activated during programming.

GewaLink channels 0-127 (channel 62 has no function), 4096 codes

and Infra-code can be programmed. NOTE! The range is reduced if

the detector eye is covered or in any other way obscured by curtains

or furniture for example.

Cleaning

Clean the case of the receiver using some washing-up liquid. Use

only a damp rag, not a wet one.

Technical Data

Supply Voltage: 12 - 24 V stabilized DC (-5%

+20%) or 24 V AC (+/- 20%)

Max Current Consumption: 70 mA

Max Load each Relay: 4 A resistive load at 24 V AC/

3 A inductive load at 24 V AC

2 A inductive load at 24 V DC

Total Max Load all Relays: 100 VA (UL, CSA)

Max Detectors: 2

Programming Channels: GewaLink channels

0-127 (channel 62 has no

function), 4096 codes and Infra-

code. Infra-code applies from

serial number: 382763.

Ambient Temperature Range: -20° - +35°C, ( -4° - +95°F)

User enviroment: Indoor; IR-2ML, IR-2MLOD, IR-

2ML NO

Outdoor (IP-55); IR-2MLU,

IR-2MLUOD

Product life: 10 years

2(4)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Abilia 808400 - IR-2ML Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info