677159
35
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
35
7. Finish by pressing
---
. The indicator light for the level key flashes green to
show that the operation is complete. Now test by scanning to the key or
pressing the key where Remote Scanning is stored. If a joystick is connected,
it is possible to control all the keys 1-9.
Quick guide
Create Remote Scanning with automatic setting:
P
+
*
,
2
, choose level,
choose where to store,
---
.
Create Remote Scanning with manual setting:
P
+
*
,
2
, choose level, choose
where to store, choose dwell time,
---
, choose time out,
---
.
Mouse scanning
Control Prog can control the mouse of a PC, i.e. move the cursor in eight
different directions, click the mouse button, and hold it down. Mouse scanning
is stored on any key in Control Prog. When you activate this key, either by
pressing the key or by scanning to this key, it is possible to directly control the
mouse with a joystick. You can remain in this position as long as you wish. The
indicator lights on key 1-9 flash when a joystick is moved in different directions.
To be able to control the mouse you must have an Access PC interface
connected to the computer. Also, study the Access PC interface manual to find
out how to install. Also see section "Connecting control switches". There are
four different Control Prog settings for the Mouse scanning to decide on: ID-
code, latch time, dwell time and time out.
ID code: Set in the same way as for the Access PC-interface (0-15 where A-F
corresponds to 11-16).
Latch time: The time needed before a mouse button on a standard mouse is
locked when you press it. Use the Enter function to lock (0.1 -25.5 sec,
recommended setting 1.5 sec). Release by touching Enter.
Dwell time: The time needed to leave mouse scanning (1-25 sec., recommended
setting 5 sec.). Control Prog leaves the mouse scanning state if the mouse is
moved constantly in any direction during a set time.
Time out: The time needed before Control Prog automatically leaves mouse
scanning (1-255 sec., recommended setting 240 sec.).
NOTE! The latch time must be set shorter than the dwell time, which in its turn
must be set shorter than time out.
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Abilia Manual Control wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Abilia Manual Control

Abilia Manual Control Bedienungsanleitung - Deutsch - 48 seiten

Abilia Manual Control Bedienungsanleitung - Holländisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info