677230
14
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
14
Power supply
The receiver is powered with 12-24V AC/DC (-10% - +20%).
Simple programming
Gewa Andromeda is designed to be easy to program. Follow the instructions below for
programming the most common uses.
The IR-receiver can be programmed with GewaLink-channels 0-127 (channel 62 has no
function) or one coded channel (4096). The selection is also made during programming
whether a particular relay is to function in a monostable or a bistable manner.
A Gewa IR-transmitter is required to program the receiver.
Monostable functioning = The relay is activated as long as the key on the IR-transmitter is
held down.
Bistable functioning = The relay is activated when the key on the IR-transmitter is held
down and releases. The second time the key is held down and released, the relay will be
deactivated.
Warning!
The relevant relay is activated during the programming. This may cause an inadvertent
activation of some equipment.
Program relay for IR and Monostable functioning
1. Press the selected key on the IR-transmitter and, at the same time, press the
programming button for the relay, Btn1 on the IR-receiver.
2. Wait until the indicator lamp flashes and the relay is activated.
3. Release the programming button (within 2 seconds) and the key on the IR-
transmitter.
4. Check the function by pressing the selected key on the IR-transmitter.
Program relay for IR and Bistable functioning
1. Press the selected key on the IR-transmitter and, at the same time, press the
programming button for the relay, Btn1 on the IR-receiver.
2. Wait until the indicator lamp flashes and the relay is activated. Keep the button/key
pressed for 2 seconds.
3. Release the programming button and the key on the IR-transmitter.
4. Check the function by pressing the selected key on the IR-transmitter.
If you are not satisfied with the selected channel (key on the IR-transmitter) or function,
simply repeat the procedure. Remember that if the programming button is held down for less
than 2 seconds, the relay is programmed with a monostable function. If it is held down for 2
seconds, the relay is programmed with a bistable function.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Abilia REC1 Gewa Andromeda 4198XX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info