Bedienungsanleitung Absaar H (Seite 11 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

650557

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

The following contents are not speciﬁc to your device. They apply to all Absaar Consumer and Professi-

onal devices for a general-purpose description and understanding. Details of how to use your device are

provided on the device packaging.

Before starting the charging process, make sure that all switches on your charger have been set

according to the battery’s speciﬁcations.

APPLICATIONS

Depending on the capacity of your Absaar charger you may charge batteries of different vehicle

categories. The pictograms on the packaging illustrate the types of vehicle and battery types that

are compatible with your charger.

Caution: Only use your charger to charge batteries that correspond to the voltage and capacity of

your charger. Please check the technical speciﬁcations of your battery or contact your battery or

vehicle manufacturer in case of doubt. We assume no liability when charging unsuitable batteries.

CHARGING TYPE

Absaar manufactures two types of battery chargers: standard and automatic battery chargers.

Standard:

The charger must be disconnected from the battery once the charging process has ﬁnished.

Please monitor the charging process and stop it manually when the battery is charged. If the

charger remains connected to the battery for too long the battery will be damaged.

Automatic:

Once the charging process has ﬁnished, the charger will switch to trickle charge mode and does

not have to be manually disconnected from the battery.

The trickle charge mode allows you to leave the charger connected to the battery as long as you

want, making it the perfect choice for keeping the battery at a 100% charging level during the

winter season when not using the vehicle.

8A | 12V | MAX 80 AH

DESCRIPTION: AMPERAGE | VOLTAGE | CAPACITY

Ampere: Your device and its packaging show the maximum current value that the charge can supply to the battery. This de-

pends on the capacity of the battery you are going to charge. It decreases during the charging process.

Voltage: The voltage of the battery that you want to charge must correspond with the battery charger’s voltage. Otherwise the

charger may not be connected to the battery. Connecting the battery to the charger when the voltages do not match will cause

battery damage.

Capacity: If the Ah rating of the battery falls within the Ah range of the charger, it is possible to fully recharge the empty battery

within 8 to 10 hours. If the battery has a higher Ah rating you may still charge it but the charging process will take signiﬁcantly

longer.

CONNECTING THE BATTERY CLAMPS

Connecting the charger to the battery poles (follow this sequence):

1. Connect the red battery clamp (+) to the positive (+) battery pole.

2. Connect the black battery clamp (-) to the negative (-) battery pole.

3. Use the power cord to connect the charger to a wall outlet.

To stop the charging process, perform the following steps in order:

1. Unplug the power cord of the charger from the wall outlet.

2. Disconnect the black battery clamp (-) from the negative (-) battery pole.

3. Disconnect the red battery clamp (+) from the positive (+) battery pole.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Absaar H Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info