755245
25
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
25
Inactive: no signal sounds for any position
Start of drive: signal sounds at the start of the opening or locking drive
cancel 
Reduced Locking is reduced to one-speed (e.g. one-speed even for two-speed
locking and opening of the door). We recommend permanent two-speed
locking (Setting: „Automatic“).
Automatic, 1x closing.
cancel 
Drive power Setting the drive speed. We recommend using the “Automatic” setting at
all times to provide a longer service life for the batteries and key.
Automatic, Maximum.
cancel 
II. Structure with FCA3000 / FSA3550 window drive

select the required drive.
Overview Driving cycles: shows how many times the system has been opened and
closed. Lock: shows the lock position (locked or unlocked, the window‘s
tilt position is not shown).

Rename You can assign a name to each drive (e.g. front door, garage etc.). Assign-
ment of the characters see 5.1 e. Continue to next character with .
Save the name with .
Cancel with .
Without code Lock without code. Note: If the menu option “lock without code” is
selected, you can lock the door simply by pressing . Inactive,
active. cancel 
Tilting funct. Selection of tilt function
Inactive, active. cancel 
If this setting is chosen, the window moves when pressing the transmit-
ter‘s „open“ button from the tilt position to the “open” position. In doing
so, the window must always be brought in manually!
When using the tilting function, always pull the window by hand until
the drive has reached its rest position before actuating the drive! In
particular with older windows and patio doors, there is a risk that the

manually.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Abus CFT3000 HomeTec Pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info