2. In the installer menu of the wireless alarm centre, se-
lect the “Other Devices Info Module/Int Siren
Teach Device” menu point.
3. Press “Send” on the wireless alarm centre.
The centre sends the teach signal to the info module.
After successful teaching of the wireless alarm centre:
• The seven lower LEDs on the info module
stop flashing.
• All LEDs light up constantly.
• The info module emits a double tone.
4. Confirm the successful teaching procedure on the
wireless alarm centre.
5. Define which partition should be used by the info mod-
ule. Select the partition using the jumper.
When a partition has been selected, the info module
emits a double tone again. Only the green power sup-
ply LED is still lit.
The info module has left the learning mode.
The diagram shows the jumper setting for the different
partitions:
Partition 1 Partition 2 Partition 3 Partition 4
