Bedienungsanleitung Abus nvr10020 (Seite 73 von 74) (Englisch)

756352

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Fault rectification

Before contacting the Service department, read the following information to determine the possible cause of any fault.

Fault Cause Solution

No power Power cable not connected Connect the power cable properly to the

socket

Power switch at OFF Set power switch to ON

No power supplied from socket If necessary, use another device at the

socket

No picture The screen is not set to receive Set correct video input mode, until an image

is received from the recorder

Video cable is not connected properly

Connect the video cable properly

The connected monitor is switched off Switch on monitor

No sound

Audio cable is not connected properly

Connect the audio cable properly

Devices connected via audio cable are not

switched on

Check the power supply and power switch of

the connected audio device

Audio connecting cable is damaged

Replace cable

Hard disk drive not functioning Connection cable is not connected properly Connect the cable properly

Hard disk drive faulty or incompatible with the

system

Replace the hard disk drive with a

recommended hard disk drive

USB connection not functioning

Device is not supported Connect correct USB medium, USB 2.0

USB Hub was used Connect USB medium directly

Network access not possible Network cable connection loose Insert network cable.

Network settings (DCHP, IP address etc.)

incorrect

Check and if necessary correct network

configuration, see page 27.

Recording is not possible No HDD, or HDD not initialised Install and initialise hard disk drive

Sudden switch-off The internal temperature of the device is too

high

Clean the device and/or remove any objects

impeding the ventilation

Disposal

Notes on EC directives for waste electrical

and electronic equipment

For the protection of the environment, at the end of its

useful lifespan, the device may not be disposed of in

household waste. Disposal can be carried out at suitable

national collection points. Obey local regulations when

disposing of material.

Dispose of the device in accordance with EU

Directive 2011/65/EU -

WEEE (Waste Electrical

and Electronic Equipment). If you have any

questions, please contact the municipal

authority responsible for disposal. Information

on collection points

for waste equipment can be

obtained from the local or district authorities,

local waste disposal companies or the dealer.

Notes on RoHS EU Directive

The device complies with the RoHS directive.

Compliance with the RoHS directive means that the

product or component contains none of the following

substances in higher concentrations than the highest

concentrations in homogeneous materials, unless the

substance is part of an application that is excluded from

the RoHS Directive:

a) 0.1 % lead (by weight)

b) Mercury

c) Hexavalent chromium

d) Polybrominated biphenyl (PBB) and polybrominated

diphenyl ether

e) 0.01 % cadmium (by weight).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Abus nvr10020 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Abus nvr10020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info