756353
40
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
Setting: Configuration
40
HDMI: if this option is selected, the
audio output takes place via the
HDMI interface.
Display
status bar
Activate/deactivate the status bar.
Volume Adjust volume
Event
output
Allocate monitor for the output of
events.
Full Screen
Monitoring Dwell
Time
The number of seconds for which
the event will be displayed on the
allocated monitor.
Post-Event
Display Time
The number of seconds for which
the pop-up window should be
displayed in the event of an alarm.
Note
VGA monitor connected:
If a VGA monitor is connected, it will be
recognised automatically when the device is
started up. The main video signal will be
displayed
on the monitor.
No HDMI monitor connected:
If no HDMI cable is connected to the monitor
when the device is started up, the main video
signal will be emitted at the VGA connection.
Connect the VGA cable and restart the recorder to
perform automatic detection.
View tab
You can display up to 36 cameras simultaneously in live
view.
1. Click on the View tab
2. Select a view mode from
3. Use the navigation keys to allocate the required
camera signal to the corresponding screen
section.
4. Click on Apply to apply the setting.
Symbol Meaning
Select
multi-view:
1x1, 2x2, 5+1, 7+1, 3x3,..
Assign all available
cameras to the current view
in sequence (D1, D2, ...).
Remove all cameras from
the current view.
Next/previous page. If more
cameras are assigned than
the amount of available
spaces in the view, an
additional page will be
created.
The mouse scroll wheel can
be used to move between
pages in the live view.
Exceptions
Set the response of the recorder for warning messages
and system events here. To do this, activate the “Enable
event hint” setting.
You can trigger a warning for the following error types:
HDD Full
HDD Error
Network Disconnected
IP Conflicted
Illegal Login
Exception Error
Note
Watch out for possible limitations in the live view
with regards to the local decoding power of the
recorder.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Abus nvr10030 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Abus nvr10030

Abus nvr10030 Bedienungsanleitung - Deutsch - 75 seiten

Abus nvr10030 Bedienungsanleitung - Holländisch - 74 seiten

Abus nvr10030 Bedienungsanleitung - Dänisch - 74 seiten

Abus nvr10030 Bedienungsanleitung - Französisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info