Bedienungsanleitung Abus nvr10030 (Seite 45 von 74) (Englisch)

756353

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Setting: Camera

!: there is a camera fault or the

camera is offline.

IP Camera Address Displays the IP address.

Edit Manually change the settings for

the IP address, protocol, port

and user name.

Update Updates the network camera

firmware via USB.

Name Displays the camera name (see

OSD menu item).

Protocol Displays the manufacturer

device protocol.

Device Model Displays the camera model

number.

Management Port Saved management port

Firmware IP camera firmware version

Advanced

Settings

If available: Access to the

advanced settings

Click on Refresh to display the cameras on your

network.

Note

The update function via USB is not available for all

cameras. Alternatively, you can use the ABUS IP

Installer for the IP camera firmware update.

Click on Delete to delete the cameras you have already

added.

Click on Add All to add all the cameras displayed.

Select Custom Adding to manually add a camera.

Custom Adding

Here you can manually add network cameras by entering

the IP address and protocol and specifying the port and

user ID.

You can also use this menu to add network cameras

from other manufacturers, ONVIF-compatible cameras

and RTSP profiles.

Click on Search to refresh the device list.

Select a camera from the list and add to/change the

corresponding parameters when necessary:

Parameter Setting

Address IP address of the network camera.

Protocol Manufacturer communication protocol.

Check the compatibility list for this for

third-party manufacturers at

www.abus.com.

Port Communication port of the network

camera (usually port 80 or 8000)

User name User name for the admin account of the

network camera

Admin

password

Password for the admin account of the

network camera.

Note

If you are using a third-party manufacturer's

camera, please check in advance that it is on the

compatibility list at www.abus.com. The camera

functionality supported by the recorder may be

restricted if using certain models of cameras or

cameras from certain manufacturers.

Click on Add to transfer all manual settings for adding a

camera to the recorder.

Click on Protocol to create a custom RSTP profile for the

selected camera.

Note

If your camera model is not included in the

compatibility list, you also have the option of

setting up the camera on the recorder using an

RTSP streaming profile. To do this, you will need

the RTSP URL for the camera live stream, which

you can find in the user guide for your camera or

request from the manufacturer.

Protocol

Here you can create a custom RTSP profile, which can

then be assigned to a camera in the “Custom Adding”

menu.

Note

If you integrate a camera using RTSP, only the

video image from the camera will be available on

the recorder. Camera control functions (e.g. PTZ)

and motion detection are not supported.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Abus nvr10030 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Abus nvr10030

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info