Bedienungsanleitung Acctim Colorado LED Alarm Clock (Seite 1 von 1) (Englisch)

776676

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

IMPORTANT NOTE: The charger used to power this clock must be

suitable and of the correct output voltage (volts) and current (amps)

to charge the smart device.

GETTING STARTED

Plug the USB lead supplied into one of the USB ports at the back of the

clock and connect it to your phone/smart device charger, now plug the

charger into a standard household outlet.

CHARGING YOUR PHONE/SMART DEVICE

Note: You can use either USB port ‘USB.1 or USB.2’ at the back of the

clock to charge or power your device.

Plug the smart devices ‘USB data cable lead’ into the port that you want

to charge from and connect it to your phone/smart device. Your clock

now becomes a hub and can be used to charge most Smartphones,

tablets, e-readers, MP3, bluetooth speakers etc.

SETTING THE TIME

Slide the AL.SET.T.SET.LOCK switch to the T.SET position.

Press the HR (hour) button or MIN (minute) button to set the desired

time. Note - The PM indicator will appear for PM time.

Slide the switch to the LOCK position.

SETTING THE ALARM

Slide the AL.SET.T.SET.LOCK switch to the AL.SET position. Press the HR

(hour) button or MIN (minute) button to set the desired alarm time.

Note - The PM indicator will appear for PM time.

Slide the switch to the LOCK position.

SAFETY

This electric clock may represent a hazard for young children. Keep

this clock out of reach of small children to avoid risk of shock or

possible choking hazard from small parts or batteries.

CHANGING THE BATTERIES

It is recommended that you replace the battery annually. Only

use 1XAA (1.5V) Alkaline battery in this clock. Insert the battery

observing the polarity markings inside the compartment. Do

not mix old and new batteries, dierent types or brands. Remove

the battery if the clock is stored or not in use. Remove exhausted

batteries from the product.

Warning: Do not recharge non-rechargeable batteries.

Please dispose of used batteries in a responsible manner. For more

information please contact your local authority.

MAINTENANCE

A soft paper towel may be used to clean the clock. Do not use

corrosive cleaners or chemical solutions on the clock. Keep the clock

clean and dry to avoid any problems.

YOUR GUARANTEE

Your clock is guaranteed for 12 months from the date of purchase

against any faults arising from defective materials or manufacture.

Damage caused through careless handling, misuse or in transit is

expressly excluded. Should this clock fail within 12 months please

return it in the rst instance to your retailer.

If you have any queries, problems or do not understand any part of

these instructions please contact:

Customer Help Line Locall 0845 1207208 or (01908) 449208

Mon - Fri 9.00am - 4.30pm

email for service: service@acctim.com or visit www.acctim.com

ENVIRONMENTAL PROTECTION

Disposal of electrical and electronic equipment

Do not dispose of this product with household waste. For

the proper treatment, recovery and recycling please take

this product to the appropriate collection point. If you are

unsure of where this is contact your local authority.

Improper disposal may be harmful to the environment.

V.1

LED ALARM CLOCK

Acctim Smart Connector is an innovative new technology which

allows you to use or upcycle your Smartphone charger to reduce

landll. Simply plug the supplied USB lead into the clock and the

other end into your phone/smart device charger. You can now use

your clock to charge/power your smart device.

FEATURES:

Jumbo LED display

Soft touch painted case

Alarm with push case for snooze

USB powered - Just connect to a phone/smart device charger

160cm USB lead supplied

Second USB port to charge Smartphone/tablet/e-reader etc.

Battery back-up requires 1 X AA battery (not included)

Thank you for your purchase of this quality clock. Please read these

instructions carefully and store in a safe place for future reference.

OPTIONAL BATTERY BACK UP

This clock has an optional battery back up feature, designed to retain

the time and alarm settings in the event of a power failure. To use the

battery back up, insert one "AA" battery (1.5 Volt) into the battery

compartment at the back of the clock. If the power fails, the battery

back up will automatically continue running the clock and maintain

the time and alarm settings - Note: The alarm will not sound and the

time display will not function under battery power.

Acctim Smart Connector

USING THE SNOOZE FEATURE

When the alarm sounds, push the top of the clock down to activate

the Snooze feature. The alarm will stop and sound again after

8 to 9 minutes. The alarm bell icon will ash. To stop the snooze

function, slide the AL.OFF/ON switch to the AL.OFF position.

160cm USB data cable

lead supplied

Your devices ‘USB data

cable lead’ (not supplied)

Connect to your

phone/smart device charger

Connect to your

phone/smart device

TO TURN ON/OFF THE ALARM

To turn on/o the alarm slide the AL.ON/OFF switch to the AL.ON

position, the alarm bell icon will appear. When the alarm sounds, slide

the AL.ON/OFF switch to the AL.OFF position.

Front page Back page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acctim Colorado LED Alarm Clock Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info