Bedienungsanleitung Acer FL152S (Seite 34 von 73) (Englisch)

709980

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

English

USING THE PROJECTOR

 1.8 / 2.0 / 2.4 / 2.6: For specic PC / Photo source.

Note:

 These options are only available if the 3D mode function is disabled, the Wall Color setting is not set

to Blackboard, and the Display Mode setting is not set to DICOM SIM., HDR SIM. or HLG SIM.

 In 3D mode, user can only select 3D for Gamma setting.

 If the Wall Color setting is set to Blackboard, user can only select Blackboard for Gamma setting.

 If the Display Mode setting is set to DICOM SIM., user can only select DICOM SIM. for Gamma

setting.

 If the Display Mode setting is set to HDR SIM. or HLG SIM., user can only select HDR SIM. or HLG

SIM. for Gamma setting.

Color Settings

Congure the color settings.

 BrilliantColor

: This adjustable item utilizes a new color-processing algorithm and enhancements to

enable higher brightness while providing true, more vibrant colors in picture.

 Color Temperature: Select a color temperature from Warm, Standard, Cool, or Cold.

 Color Matching: Select the following options:

– Color: Adjust the red, green, black, cyan, yellow, magenta, and white level of the image.

– Hue / R(red)*: Adjust the color balance of red and green.

Note: *If the Color setting is set to White, you can adjust the red color setting.

– Saturation / G(green)*: Adjust a video image from black and white to fully saturated color.

Note: *If the Color setting is set to White, you can adjust the green color setting.

– Gain / B(blue)*: Adjust the image brightness.

Note: *If the Color setting is set to White, you can adjust the blue color setting.

– Reset: Return the factory default settings for color matching.

– Exit: Exit the “Color Matching” menu.

 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an

image.

– Reset: Return the factory default settings for RGB gain/bias.

– Exit: Exit the “RGB Gain/Bias” menu.

 Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:

AUTO, RGB, or YUV.

 Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,

RGB(0-255), RGB(16-235), and YUV.

Signal

Adjust the signal options.

 Automatic: Congure automatically the signal (the frequency and phase items are grayed out). If

automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.

 Frequency: Change the display data frequency to match the frequency of your computer’s graphic

card. Use this function only if the image appears to icker vertically.

 Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be

unstable or ickers, use this function to correct it.

 H. Position: Adjust the horizontal positioning of the image.

 V. Position: Adjust the vertical positioning of the image.

Note: This menu is only available if the input source is RGB/Component.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acer FL152S Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acer FL152S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info