Bedienungsanleitung Acer N35 (Seite 79 von 98) (Englisch)

26990

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

9 Getting connected

Connecting to the Internet

5 In the Select a modem list, select your modem type.

If your modem type does not appear, try re-inserting the modem card.

6 You should not need to change any settings in Advanced. Most ISPs now use a

dynamically-assigned address. If the ISP you are connecting to does not use a

dynamically-assigned address, tap Advanced and then the TCP/IP tab, and enter the

address. When finished, tap OK and then Next.

7 Enter the ISP phone number, and tap Next.

8 Enter your username, password and domain (if any), and tap Finish to complete the

process.

To connect to your ISP, open the Connections main window and tap Manage Existing

Connections. Tap and hold on the applicable dial-up settings and select Connect. Your

modem will dial-out and attempt to create the connection.

To create a wireless Ethernet connection to an ISP

1 Insert the wireless Ethernet card into your handheld. For instructions on inserting and

using the Ethernet card, see the documentation that came with the card.

2 The first time you insert the card, a notification will appear, asking you whether the

installed network card should be used to connect to The Internet or Work. Where

possible, the Service Set Identifier (SSID) will be determined automatically. Select The

Internet, then either accept all default settings by tapping OK (most home networks

will allow you to immediately get online without further configuration) or tap

Settings to configure the connection. Sometimes a network will require a WEP key. If

so, you will be prompted for one at this point.

3 Select the Advanced tab from the Connections Settings. Select the Network Card tab

to customize how each of your installed network card drivers connects. Highlight the

driver name of the card you wish to configure. Indicate whether My network card

connects to: The Internet. Tap on the name of the driver to receive advanced

options.

4 Configure the IP address settings in the IP Address tab.

5 Configure the DNS and WINS settings in the Name Servers tab.

You must remove then reinsert your network card for these settings to take effect.

6 Select the Network Card button from Connection Settings-Advanced to

configure your wireless networks. Networks that you have already configured are

preferred networks and are listed in the Wireless tab. You can select to connect to

only preferred networks or have your handheld search for and connect to any

available network whether it is preferred or not. Press Add New Settings... if you do

not see a network you'd like to connect to.

7In the General tab you can set the network name (also known as SSID); this is only

editable if you are creating a new wireless network profile else you are viewing a

preferred network and the SSID has already been established. Indicate whether this

network will connect you to The Internet. Finally, if this is a new network profile,

you can indicate whether this is a computer-to-computer network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acer N35 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acer N35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info