Warning Indicator
When the “
LAMP
” indicator lights solid amber, the projector
will automatically shut itself down. Please contact your local
reseller or service center.
When the “
TEMP
” indicator lights solid amber for about
20
sec-
onds, it indicates the projector has been overheated. You will see
a message “Projector Overheated. Lamp will automatically turn
off soon.” on the on-screen display. The projector will automati-
cally shut itself down.
Under normal conditions, the projector can be switched on again
after it has cooled down. If the problem persists, you should con-
tact your local dealer or our service center.
When the “
TEMP
” indicator ashs amber for about
30
seconds,
you will see a message “Fan fail. Lamp will automatically turn off
soon.” on the on-screen display. Please contact your local dealer
or our service center.
Powering Off the Projector
1.Pressthe“Power”buttontoturnofftheprojectorlamp,youwill
see a message “Please press power button again to complete the
shutdown process. Warning: DO NOT unplug while the projector
fan is still running.” displayed on the projector’s screen. Press
the“Power”buttonagaintoconfirm,otherwisethemessagewill
disappear after 5 seconds.
2.Thecoolingfanscontinuetooperateforabout30secondsfor
coolingcycleandthePowerLEDwillbequick
amber ash
.
WhenthePowerLEDbecomesslowflashing,theprojectorhas
enteredstandbymode.Ifyouwishtoturntheprojectorbackon,
you must wait until the projector has completed the cooling cycle
andhasenteredstandbymode.Onceinstandbymode,simply
press “Power” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
4.Donotturnontheprojectorimmediatelyfollowingapoweroff
procedure.
5. Close the lens cap to prevent dust if you like.
