Bedienungsanleitung Acer V12W (Seite 37 von 69) (Englisch)

543873

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

English

Setting

Startup Screen Use this function to select your desired startup screen. If you

change the setting, the changes will take effect when you exit the

OSD menu.

• Acer: The default startup screen of your Acer projector.

• User: Use memorize picture from "Screen Capture" function.

Screen Capture

Use this function to customize the startup screen. To capture the

image that you want to use as the startup screen, follow the

instructions below.

Notice:

Before proceeding with the following steps, make sure that the

"Keystone" is set to the default value 0 and the aspect ratio is set

to 4:3. For details, refer to the "Image" section.

• Change the "Startup Screen" from the default setting "Acer"

to "User".

• Press "Screen Capture" to customize the startup screen.

• A dialog box appears to confirm the action. Choose "Yes" to

use the current image as your customized startup screen. The

capture range is the red rectangular area. Choose "No" to

cancel the screen capture and exit the onscreen display (OSD).

• A message appears, stating that the screen capture is in

progress.

• When the screen capture is finished, the message disappears

and the original display is shown.

• The customized startup screen, as shown below, takes effect

when there is a new input signal or when you restart the

projector.

Source Lock When source lock is turned "Off", the projector will search for

other signals if the current input signal is lost. When source lock is

turned "On", it will "lock" the current source channel unless you

press "Source" button on the remote control for the next channel.

Closed Caption

Selects a preferred closed captioning mode from CC1, CC2, CC3,

CC4, (CC1 displays captions in the primary language in your area).

Select "Off" to turn off the captioning feature. This function is only

available when a composite video or S-Video input signal is

selected and its system format is NTSC.

<Note> Set your screen aspect ratio to 4:3. This function is not

available when the aspect ratio is "16:9" or "Auto" .

VGA OUT (Standby) Default is "Off". Choose "On" to enable VGA OUT connection.

Reset

• Press the button and choose "Yes" to return the

parameters on all menus to the factory default settings.

Security Security

This projector provides a useful security function for the

administrator to manage usage of the projector .

Press to change the "Security" setting. If the security function

is enabled, your must enter the "Administrator Password" first

before changing the security settings.

• Select "On" to enable the security function. The user has to

enter a password to operate the projector. Please refer to the

"User Password" section for details.

• If "Off" is selected, then the user can turn on the projector

without password.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acer V12W Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acer V12W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info