CONNECTING THE BT2 TO A BLUETOOTH DEVICE
- Power the BT2 on and ensure the blue light is ashing; this will either happen
automatically or after pressing and holding the Bluetooth button
- Go to the Bluetooth settings menu of your device. The BT2 should appear in the
list of available devices. If it does not appear, you should refresh it
- Once connected, the BT2 will show a solid blue status light and all audio played
on the device will be played on the BT2
TAKING A CALL ON THE BT2
- Ensure your mobile phone is connected to the BT2 as above
- When the phone rings, either press and release the Bluetooth button on the BT2
or accept the call on your mobile to take the call. The microphone is next to the
control pad at the top of the BT2
- To disconnect the call, either hang up on the connected device or press and
release the Bluetooth button
- To reject the incoming call, press the Bluetooth button on the BT2 for a second and
then release it, or reject the call on your mobile
CONNECTING TWO BT2S AS A STEREO PAIR
- You will need two BT2s for this process. Ensure both BT2s are turned on and no
more than three metres apart
- Connect to a BT2 via Bluetooth as normal
- On the connected unit press the up and down volume at the same time - you will
hear a beep and the lower indicator light will ash white. Do this for both units
- The BT2s will now function as a stereo pair. The unit you paired your Bluetooth
device to will function as the left channel with the second unit as the right
- Volume can still be controlled via the connected device but the response will be
slightly slower
