Bedienungsanleitung Acoustica CD-DVD Label Maker (Seite 74 von 85) (Englisch)

541325

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

has room to slide around inside the paper tray, there's a good chance that this will cause

alignment errors on a large variety of printer models.

Printer Calibration Wizard Intro Page

Printer Calibration Wizard Alignment Page

Printer Calibration Wizard Finish Page

Help Contents

The Printer Calibration Wizard:

Alignment

Page

On this page of the wizard, you'll enter the horizontal and vertical offsets to account for the

alignment error you measured on the aligment-test sheet that just printed.

Horizontal Adjustment:

Unfold the sheet you printed, turn it sideways, and see where the fold

crease crosses the axis labeled "Horizontal Offset". Enter the number you measure in this edit

control. If the fold crease is above the center line, you'll be entering a negative number. If the

crease doesn't have the same offsets on the two grid lines at the edges of the sheet as it does

on the center grid line/axis, it's an indication that your printer feeds paper through itself

crookedly. (Although it could mean that you just didn't fold the sheet perfectly -- check that

first.) If it doesn't feed straight, try using the value at the center of the sheet and then

compensating for the printer's drift with the stretch settings in the Printer Alignment dialog

(accessible by clicking the "Alignment" button on the Print dialog).

Vertical Adjustment:

Unfold the sheet you printed, turn it right-side up, and see where the

fold crease crosses the axis labeled "Vertical Offset". Enter the number you measure in this

edit control. If the fold crease is above the center line, you'll be entering a negative number. If

the crease doesn't have the same offsets on the two grid lines at the edges of the sheet as it

does on the center grid line/axis, it's an indication that your printer feeds paper through itself

crookedly. (Although it could mean that you just didn't fold the sheet perfectly -- check that

first.) If it doesn't feed straight, try using the value at the center of the sheet and then

compensating for the printer's drift with the stretch settings in the Printer Alignment dialog

(accessible by clicking the "Alignment" button on the Print dialog).

Print another test sheet with my revised settings:

If you check this box, once you click the

"Next" button, the wizard will print another copy of the alignment-test sheet with the horizontal

and vertical adjustments you've entered on this page, so you can see if they produce a

perfectly centered page.

Few Bonus Calibration Tips:

* Make sure your paper fits snugly in the paper tray! If your paper has room to slide around

inside the paper tray, there's a good chance that this will induce alignment errors. Checking

this could eliminate the need for alignment correction altogether.

e 74 of 85

6/13/2006file://C:\acoustica\cdlabelmaker\hel

-label-make

-flat.htm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acoustica CD-DVD Label Maker Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info