541323
68
Zoom out
Zoom in
Vorherige Seite
1/93
Nächste Seite
Default Input (Recording)
Choose the default sound device from which to record audio. Please note that on Vista, you may need to make
sure the device is on and plugged in, otherwise it may not show up.
Default Output (Playback)
Choose the sound device from which to play audio. Please note that on Vista, you may need to make sure the
device is on and plugged in to the speakers, otherwise it may not show up.
Sample Rate
Choose a sample rate for both recording and playback. 44100 is the default for CD quality. Mixcraft supports
sample rates up to 192000, if your sound card supports it.
Bit Depth
This is the number of bits per sample. 16 is the default for CD quality. Mixcraft supports bit depth of 24 bit for ultra
high quality. Only use 8 bit if you have to (8 bit sounds very noisy).
Number Of Buffers
This is the number of audio buffers to pre-mix before starting playback. The number of buffers will determine the
latency. More buffers lead to higher latency. Fewer buffers lead to lower latency but possible audio gapping.
Buffer Size
The size of the buffer also determines the latency of the software. Larger buffers lead to higher latency. Choosing
different buffer sizes may help the software work better with your sound card or sound device. Smaller buffers lead
to lower latency but also possible audio gapping.
Open Mixer...
This button opens the Window's mixer to allow you to configure the inputs or recording levels for your sound
devices.
ASIO Preferences
These are the preference options if ASIO mode is selected on the Sound Device Preferences. ASIO is an
alternative driver system that allows for lower latency and better synchronization between playback and recording.
Tip: Always make sure that you have the latest drivers for your sound device or sound card. Visit your sound
device or sound card manufacturer's website.
Default Input (Recording)
Choose the default sound input to record audio from. Please note that on Vista, you may need to make sure the
device is on and plugged in, otherwise it may not show up.
Default Output (Playback)
Choose the sound output to play audio from. Please note that on Vista, you need to make sure the device is on
and plugged in to speakers, otherwise it may not show up.
ASIO Device
Choose the default ASIO Device to record from. ASIO only allows for one device at a time.
Open Mixer...
This button opens the ASIO mixer for the ASIO Device and allows you to choose the latency settings and other
more advanced settings. (The ASIO mixer is made by a 3rd party and will look different depending on what type of
sound device you have.)
WaveRT Preferences
Page 68 of 93Mixcraft 4
2/7/2008file://C:\acoustica\mixcraft\hel
p
\flat-manual\mixcraft.htm
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Acoustica Mixcraft-4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info