Bedienungsanleitung Acoustica Mixcraft-5 (Seite 18 von 115) (Englisch)

541322

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Speed

Choose a CD writing speed. In some cases, burning at a slower speed may improve the success rate of burning and

may be more compatible in some older CD players. If you have a CD writer with Burn Proof type protection, you can

burn at maximum speed without worrying about a burn failure.

Test Mode

In this mode, the CD writer will not turn its laser on for writing and will go through the process of transferring the data

to CD. If you are having problems burning a CD, go to our troubleshooting area. This allows you to see if your

computer can send data to the CD writer at the desired speed.

Convert To WAV First

This will convert the mix to one or more WAV files on your hard drive. CD quality WAV files use up around 8 MB for

every audio minute that you are burning. Therefore, a 74 minute mix will take up around 650 MB or hard drive space.

The advantage to converting to WAV first is that it may help the success rate of burns for some older CD recorders,

especially if your CD writer does not have Burn Proof.

Create CD-TEXT

Some CD writers support CD-TEXT. If your CD writer supports CD-TEXT, you should be able to check the CD-TEXT

box to burn CD-TEXT. When you burn CD-TEXT, the software adds text to each CD track so that when you play the

CD on a CD player that *supports* CD-TEXT, you can see the titles and names of each track. Usually, Sony CD

players support CD-TEXT.

You can type in a CD-TEXT title for the CD's title. Track names will be derived from CD track markers.

Burn As One Track

This option essentially skips any CD track markers in the project and burns the whole project as one track. If your

burner is only supported in IMAPI mode this is a good option for a seamless mix because IMAPI mode will always put

a two second gap between tracks. (The main drawback is that you can't seek to a specific track in the CD player.)

Burn All Or Selection

Choose Burn All to burn up to 80 minutes of audio, depending on the capacity of your blank CD.

Choose Burn Selection to burn the current selection of audio. This can be useful if your mix goes beyond 74 or 80

minutes and you want to burn the extended sections. (Note that it simply uses the selected area to define a time

range to burn.)

Back Up Your Project To CD

Mix Down To Audio File

Mix down your project to one of the following audio file types: MP3, WAV, WMA or OGG.

** Note - the MP3 format is not available in Mixcraft LE (Light Edition).

Click the Mix Down button on the toolbar or select Mix Down from the File menu, followed by selecting the

format you'd like to mix down to. Alternatively, you can choose Save As.. from the File menu and then click the Save

as type drop down control to select the desired format.

Once you are viewing the Save Your Mix window with the correct format, you have the following extra options and

details

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acoustica Mixcraft-5 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info