Bedienungsanleitung Acoustica Mixcraft-5 (Seite 106 von 115) (Englisch)

541322

106

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Recordings Are Drifting And/Or Start At The Wrong Time

Welcome to the world of inaccurate timing and sound cards. If you notice that your recordings are not lining up

properly at the start, you'll need to adjust the offset or start time of the recorded sound. Make sure snap is off and

move the sound so that it lines up properly. You'll want to zoom in for the best accuracy. Switching to an ASIO driver

may help. In addition, purchasing a better sound device may help.

However, if you're noticing that your recordings are slowly drifting over time, the problem is due to an inaccurate clock

on your sound card or sound device. Each device is made with more or less accurate clocks and not all devices have

the same time as an atomic clock, for example.

If you have a Soundblaster LIVE, try recording in 48 kHz mode, by switching your Sound Device preferences to use

the sample rate of 48,000 Hz.

Drift Work Around

Assuming the start of the sound is lined up properly, go to the end of the sound and visually time stretch it with

FlexAudio using the Ctrl key so that it lines up properly. Make sure to change the pitch shift mode to Do Not Fix

Pitch. Once you've lined up the end of the recording, you should be able to go to the Sound Details Tab to view the

time stretch percentage that was needed to get it in sync. (Example percentages will be around 99.995% or

100.004%) You can simply apply this drift percentage to all recordings after that. (Don't forget to change the pitch

shift mode to Do Not Fix Pitch)!

Recordings Are Not In Sync

There are a couple of possibilities here.

The starting position of my recordings is wrong.

If the start offset of the recording is wrong, you can try the following suggestions:

• Adjust the sound manually

• Update your sound card's drivers if possible. Check the sound card's website.

• Get a new sound device. Get a more professional sound card designed for recording music, if possible.

• Try switching to ASIO mode. or WaveRT mode for better synchronization.

My recordings are slowly losing synchronization over time!

If after 10 minutes or so, your recordings are noticeably out of synchronization, you may need to get a new sound

device that won't lose synchronization.

Here are some tips to deal with drifting recordings on some sound cards.

Always make sure that you have the latest drivers for your sound card. Visit your sound card manufacturer's website

to see if there is an update.

Managing Recording 'Takes'

When you make a recording it goes into your Project's recording folder. By default, a recording is named based on

the track's name.

Recordings are deleted when you save your project or quit the software if the recording was not included in a project

that you saved.

So, if you make a recording and aren't happy with it, simply click Undo on the toolbar or delete it by clicking the Delete

key or selecting Delete from the Edit menu. If you are worried about filling up your hard drive with bad takes, simply

delete the take from within Mixcraft and then Save your project.

ASIO Is Not Available

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acoustica Mixcraft-5 Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info