Bedienungsanleitung Acoustica Mixcraft-5 (Seite 109 von 115) (Englisch)

541322

109

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

My CD/DVD Recorder Is Not Supported!

Mixcraft supports three burning engines: Primo, Goldenhawk and IMAPI.

The default and preferred engine is Primo which works on XP, Vista and above. It will burn on the fly, burn CD Text

and supports gap-less tracks.

If you are using Windows XP or Windows Vista, you can use the built in IMAPI burning engine. The draw back to

IMAPI is that it burns two second gaps between tracks on the burned CD.

Goldenhawk

Goldenhawk will burn on the fly and burns without gaps between tracks on the burned CD. Unfortunately,

Goldenhawk does not support as many CD and DVD writers. However, there is some hope.

Since many drives are clones and use the same basic technology, they also share the command system that instructs

the CD and DVD writers what to do. With that in mind, you can try different drive definitions to see if they work with

your drive.

Go into the CD Burning Preferences, make sure that Goldenhawk is selected and then click the Goldenhawk Drive

Override... button. This brings up some options for your unsupported devices. Choose the unsupported drive from

the drop down Select A Drive. First try the Use A Generic CD Writer Drive and then click OK. Restart the software to

see if it's supported by trying a test burn. If that doesn't work, go back into the Goldenhawk Override dialog and try

Use The Driver For This Drive Type option. Select a drive that sounds similar to your drive. Consult the web to find

out what type of drive it could be cloned from. Try a drive with the same manufacturer but at a slower speed, etc.

Note that it is not guaranteed to work, but this is an option to try.

Otherwise, switch to Primo or IMAPI mode if you are using XP or Vista.

I Am Getting Burn Failures

Here are some suggestions to troubleshoot a burn failure.

• Try a burn in 'Test Mode' first.

• Try a different blank CD (Make sure it's not full or scratched)

• Try a different blank CD from a different manufacturer.

• Shut down other programs and temporarily shut down your virus checker during a burn. ( Shutting down your

virus checker should be done at your own risk. Make sure you are not connected to the Internet and have

done a full virus scan recently.)

• Try burning at a slower speed, especially if your CD recorder does not have 'Burn Proof'.

• Try checking the option to 'Convert To WAV First.'

• If you have more than one CD or DVD recorder, try switching to the other recorder on the burn CD window.

• If you have Windows XP or Vista, try switching to IMAPI.

• Try switching to a different burning engine. Choose between Primo (recommended), Goldenhawk and IMAPI.

• Try burning a short sound just to verify that CD recorder can still burn and is not defective.

• Try burning with another program such as Windows Media Player to verify that your CD recorder is not

defective or having some kind of system conflict.

How Do I Get Rid Of The Two Second Gap Between Tracks On My Burned CD?

In Primo or Goldenhawk mode, audio CDs will not have a two second gap between tracks.

However, if you are burning in IMAPI mode, you are forced by the IMAPI system to have a two second gap between

tracks.

There are two options:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acoustica Mixcraft-5 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info