Bedienungsanleitung ACP MSO5351 (Seite 12 von 69) (Englisch)

660243

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

Microwave cooking uses high

frequency energy waves to heat the

food. When cooking, microwave

energy causes food molecules to

move rapidly. This rapid movement

between the food molecules creates

heat, which cooks the food.

Manual Time Entry

To cook food using a specic time and power level.

1. Open oven door and place food in oven. Close door.

• READY displays. Fan and light will turn on.

2. Press TIME ENTRY pad.

• If pad does not work, open and close oven door and try

again.

3. Enter cooking time by using the numbered keypads.

4. Press POWER LEVEL pad to change power level.

• To change the microwave’s power, press pads 1 (for

10%) through 9 (for 90%).

5. If stage cooking is desired, press STAGE and repeat steps

2 through 4.

• Up to four different stages can be programmed.

6. Press START pad.

• Oven operates and time counts down.

7. At end of cooking cycle oven beeps and shuts off.

DONE displays.

Preprogrammed Pads

Cooking food using preprogrammed keypads.

For instructions on programming keypads, see page 10 of the Programming

Oven Controls section of this manual.

1. Open oven door and place food in oven. Close

door.

• READY displays. Fan and light will turn on.

2. Press desired pad.

• For single pad entry, press only one pad.

• For double pad entry, press the two pads representing the two digits.

• To change single or double pad entry option

see User Options section in this manual.

3. When cooking two of the same food item, press the QUANTITY pad

before a preprogrammed cook cycle. The oven will automatically adjust

the program.

• Display will read, “DOUBLE.”

• To clear, open and close the door or press the STOP pad

3. Oven begins to cook.

• For additional cooking time, press preprogrammed number pad again.

4. At the end of the cooking cycle oven beeps and shuts off. DONE displays.

Factory Settings

Using the Oven Controls

Microwave Cooking

Running a microwave without a

load can cause serious damage to

electrical components. When food

is placed in the oven, microwave

energy generated by the magnetron

is absorbed by the food. When

no food is in the oven, there is

nothing to absorb the energy. The

energy bounces around the cavity

and is channeled back through

the waveguide. This can cause

arcing, re and may burn out the

magnetron.

Is it safe to run a

microwave if it is empty?

How do you defrost

food while using a

commercial microwave?

How do you know if a

container is microwave

safe?

Not all commercial microwaves have

the defrost button that is commonly

found on a residential microwave. To

defrost, simply use 20% microwave

power level.

To test if a container is microwave

safe, place it in the microwave next

to a container of water that is micro-

wave safe. Run the microwave for

one minute. If the tested container

is warm or hot, it is not microwave

safe.

Part No. 20152601

Printed in U.S.A. 8/15

Original Instructions



2015 ACP, Inc.

Cedar Rapids, Iowa 52404

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ACP MSO5351 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ACP MSO5351

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info