Bedienungsanleitung ACP RCS10DSE (Seite 7 von 17) (Englisch)

660228

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

START Key

The START key is used to

begin a manual time entry cooking

cycle. It is also used to save any

changes to programming sequences

or user options.

Display and Features (some models)

STOP/RESET Key

The STOP/RESET

key stops a cooking sequence in

progress, clears out any remaining

time, and also ends a programming

or user option cycle. When the

STOP/RESET key is used to end a

programming or option change, the

changes are discarded.

Single Key Programming

(example of key 1 shown)

This feature enables each numbered key to be programmed for a specic

cooking procedure/use. To use this feature, simply program the key to the

desired length of time and power level. To use this feature, press the key

once and the microwave will begin cooking.

Double Key Programming

(some models)

This feature enables 100 programmed entries to be made. Each entry will

be assigned a double digit number, for example 07 as shown. When using

the double key programming, two keys must be pressed to start the cooking

cycle.

Manual Time Entry

In addition to programmable keys, this microwave also accepts

specic time entry by using the TIME ENTRY key. Using manual time entry

does not aect the programmed buttons.

QTY X2 Key

The QTY X2 key increases a preset cooking time by a percentage

of the original cooking time (cooking factor). The user may specify the

percentage and it can be changed for individual cooking sequences. This

feature is very useful for cooking multiple servings of foods. The QTY X2 key

can be used with either single or double key programming. To change the

cooking factor, see Programming the Oven Control.

Stage Cooking

Stage cooking is a cooking sequence with specic power stage

changes. The user can program up to four dierent power level

changes and the specic amount of cooking time at each power

level. Each power level/cooking time combination is known as a stage. Up to

four stages can be programmed.

User Options

This microwave can be set for specic user preferences.

Options such as beep volume, maximum cooking time, and

the number of programmable keys can be changed. To change

dierent options, see User Options in this manual.

Hold

20% Power

Defrost

50% Power

70% Power

Time Entry

Stop

Start / Go

Multi Portions

10 Programmable

Keys

Braille Touch Keys

The switching operation of this microwave oven can cause voltage uctuations on the supply line. The operation of this oven under unfavorable

voltage supply conditions can have adverse eects. This device is intended for the connection to a power supply system with a maximum

permissible system impedance Zmax of  at the interface point of the user’s supply. The user has to ensure that this device is

connected only to a power supply system which fullls the requirement above. If necessary, the user can ask the public power supply company

for the system impedance at the interface point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ACP RCS10DSE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ACP RCS10DSE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info