Bedienungsanleitung Acronis Access (Seite 47 von 267) (Englisch)

624412

Zoom out

Zoom in

Vorherige Seite

1/267

Nächste Seite

1. In Active Directory Users and Computers, locate the Windows server or servers that you

have the Gateway Server installed on. They are commonly in the Computers folder.

2. Open the Properties window for the Windows server and select the Delegation tab.

3. Select Trust this computer for delegation to specified services only

4. Select Use any authentication protocol, this is required for negotiation with the SharePoint

server.

5. You must now add any SharePoint servers that you would like your users to be able to access

using Acronis Access. If your SharePoint implementation consists of multiple load balanced

nodes, you will need to add each SharePoint/Windows node to this list of permitted

computers. Click Add... to search for these Windows computers in AD and add them. For

each, you will need to select the "http" service type only.

Note: Please allow 15 to 20 minutes for these change to propagate through AD and be applied before

testing client connectivity. They will not take effect immediately.

 Allow connections to SharePoint servers using self-signed certificates - When enabled, allows

connections from this Gateway to SharePoint servers using self-signed certificates.

 Allow connections to Acronis Access servers with self-signed certificates - When enabled,

allows connections from this Gateway to Acronis Access servers using self-signed certificates.

 Allow connections from Acronis Access servers with self-signed certificates - When enabled,

allows connections to this Gateway from Acronis Access servers using self-signed certificates.

 Show hidden SMB Shares - When enabled, shows hidden system SMB shares to the users.

 Client session timeout in minutes - Sets the time before an inactive user is kicked out of the

Gateway Server.

 Use user principal name (UPN) for authentication with SharePoint Servers - When enabled,

users will authenticate to SharePoint servers via their user principal name (e.g.

hristo@glilabs.com), otherwise they will authenticate with domain/username (e.g.

glilabs/hristo).

1.5.4 Licensing Gateway Servers

For more information on licensing your Gateway Servers, visit the Licensing (p. 77) section.

1.5.5 Cluster Groups

In Acronis Access version 5.1 or newer, you have the ability to create a cluster group of Gateway

Servers.

A cluster group is a collection of Gateway Servers that share the same configuration. This allows you

to control all of the Gateways in that group at once instead of having to configure the same settings

on every Gateway individually. Typically these servers are placed behind a load balancer to provide

high availability and scalability for mobile clients.

For a clustered gateway setup, you need a load balancer, two or more gateways and an Acronis

Access Server. All of your Gateway Servers should be added to a Cluster Group in the Acronis Access

web interface and placed behind the load balancer. Your Acronis Access Server acts as both your

management server and the server with which mobile clients enroll in client management. Its role is

to manage all policies, devices and settings while the gateways' role is to provide access to the file

shares.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Access Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Access

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info