Bedienungsanleitung Acronis Backup Advanced Version 11.5 Update 6 (Seite 135 von 449) (Englisch)

624416

135

Zoom out

Zoom in

Vorherige Seite

1/449

Nächste Seite

 The operating system cannot boot.

 The disk is new and does not have MBR.

 You are recovering custom or non-Windows boot loaders (such as LILO and GRUB).

 The disk geometry is different to that stored in the backup.

There are probably other times when you may need to recover the MBR, but the above are the most

common.

When recovering the MBR of one disk to another Acronis Backup recovers Track 0, which does not

affect the target disk’s partition table and partition layout. Acronis Backup automatically updates

Windows loaders after recovery, so there is no need to recover the MBR and Track 0 for Windows

systems, unless the MBR is damaged.

5.1.1.1 Selecting archive location

Location

Details

Cloud storage

If the archive is stored in Acronis Cloud Storage, click Log in and specify the credentials to

Exporting and mounting are not supported for backups stored in Acronis Cloud Storage.

Personal

If the archive is stored in a personal vault, expand the Personal group and click the

required vault.

Centralized

If the archive is stored in a centralized vault, expand the Centralized group and click the

appropriate vault.

Machine name

Local machine

Local folders

If the archive is stored in a local folder on the machine, expand the <Machine name>

group and select the required folder.

CD, DVD, BD

If the archive is stored on optical media such as CD, DVD, or Blu-ray Discs (BD), expand the

<Machine name> group, then select the required drive. First insert the last disc. Then

insert the discs in order starting from the first one when the program prompts.

RDX, USB

If the archive is stored on an RDX drive or USB flash drive, expand the <Machine name>

group, then select the required drive. For information about using these drives, see the

"Removable devices" (p. 197) section.

Tape device

If the archive is stored on a locally attached tape device, expand the Tape devices group,

then click the required device.

Note Tape devices can only be used with Acronis Backup Advanced.

For information about using tapes, see the "Tape devices" (p. 198) section.

Network folders

If the archive is stored on a network share, expand the Network folders group, then select

the required networked machine and then click the shared folder. If the network share

requires access credentials, the program will ask for them.

Note for Linux users: To specify a Common Internet File System (CIFS) network share

which is mounted on a mount point such as /mnt/share, select this mount point instead of

the network share itself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup Advanced Version 11.5 Update 6 Seite 135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup Advanced Version 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info