Bedienungsanleitung Acronis Backup Advanced Version 11.5 Update 6 (Seite 160 von 449) (Englisch)

624416

160

Zoom out

Zoom in

Vorherige Seite

1/449

Nächste Seite

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional"

/noexecute=optin /fastdetect

Windows Vista and later

A part of the loader resides in the partition boot sector, the rest is in the files bootmgr, boot\bcd. At

starting Windows, boot\bcd is mounted to the registry key HKLM \BCD00000000.

5.6 Reverting a Windows system to its factory settings

If your Windows operating system was deployed by using Acronis Backup for System Builders, you

can revert the system to its factory settings.

Reverting the system to the factory settings can be started from the management console or at boot

time. The second method is useful if the operating system became unbootable for some reason.

 To start the operation from the management console, click Revert to factory settings in the

Welcome screen.

 To start the operation at boot time, press a hot key (usually, F11) and then click Revert to factory

settings in the appeared screen. Alternatively, you can continue booting the operating system.

Once you confirm the operation, Acronis Backup will re-deploy the factory image located in Acronis

Secure Zone. This will recover the original volume layout, the pre-installed Windows operating

system, and any original third-party applications. In addition, the software will remove all user

archives from Acronis Secure Zone and resize Acronis Secure Zone to its original size.

Caution: All user data stored on the original disks of the machine will be lost.

Sometimes, a system cannot be reverted to the factory settings even at boot time. This may be the

case if a drive failure occurred, if the factory image became corrupted in Acronis Secure Zone, or if

the original drive was replaced with a new one. In these cases, you can revert the system to the

factory settings by using the factory bootable media if it was shipped with the machine.

To start the operation, boot the machine into the factory bootable media and click Revert to factory

settings in the appeared screen. Once you confirm the operation, Acronis Backup will create Acronis

Secure Zone and copy the factory image to it. Then, it will re-deploy the factory image as described

above.

For additional information, refer to "Acronis Secure Zone" (p. 193) and "Acronis Startup Recovery

Manager" (p. 268).

5.7 Default recovery options

Each Acronis agent has its own default recovery options. Once an agent is installed, the default

options have pre-defined values, which are referred to as presets in the documentation. When

creating a recovery task, you can either use a default option, or override the default option with the

custom value that will be specific for this task only.

You can also customize a default option itself by changing its value against the pre-defined one. The

new value will be used by default in all recovery tasks you will create later on this machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup Advanced Version 11.5 Update 6 Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup Advanced Version 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info