Bedienungsanleitung Acronis Backup Advanced Version 11.5 Update 6 (Seite 204 von 449) (Englisch)

624416

204

Zoom out

Zoom in

Vorherige Seite

1/449

Nächste Seite

Tapes sent to the Imported tapes pool contain backups written by Acronis software. Before moving

such tapes to the Free tapes pool, make sure you do not need these backups.

c. Decide whether you want to back up to the default Acronis pool (p. 207) or to create a new

pool (p. 208).

Details. Having several pools enables you to use a separate tape set for each machine or

each department of your company. By using multiple pools, you can prevent backups created

via different backup plans from mixing up on one tape.

d. If you chose the Acronis pool, or enabled the new pool to take tapes from the Free tapes

pool when required, skip this step.

Otherwise, move tapes from the Free tapes pool to the new pool.

Tip. To learn whether a pool can take tapes from the Free tapes pool, click the pool and then

click Details.

6. In the Navigation tree, click Storage nodes. Select the storage node to which your tape device is

attached, and then click Create vault. Proceed as described in the "Creating a managed

centralized vault" (p. 183) section. In the Tape pool list, select the pool you decided to use on

step 5c.

Creating a centralized vault is mandatory when the tape device is attached to the storage node.

Backing up

On the Actions menu, click Back up now or Create backup plan. Configure (p. 357) the backup

settings for one or more machines. When specifying the backup destination, select the created vault.

Results

 The resulting backups will be located in the vault you created.

Tips for further usage of the tape library

 You do not need to perform full inventorying each time you load a new tape. To save time, follow

the procedure described in the "Inventorying" (p. 212) section under "Combination of fast and

full inventorying".

 You can create other vaults (p. 214) on the same tape library and select any of them as a

destination for backups.

7.4.3.3 Recovering under an operating system from a tape device

To recover under an operating system from a tape device:

1. Connect the console to the machine you want to recover.

2. On the Actions menu, click Recover.

3. Click Select data, click Data path, and then click Browse.

4. Select the vault that contains the backup whose data is to be recovered, click OK, and then click

Archive view.

5. Select the backup, and then select the data you want to recover. After you click OK, the Recover

page will show you the list of tapes required for the recovery. The missing tapes are grayed out.

If your tape device has empty slots, load these tapes into the device.

6. Configure (p. 132) other recovery settings.

7. Click OK to start the recovery operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup Advanced Version 11.5 Update 6 Seite 204

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup Advanced Version 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info