Bedienungsanleitung Acronis Backup PC 11.5 Update 6 (Seite 114 von 248) (Englisch)

624431

114

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Check access to the drivers in bootable environment

Make sure you have access to the device with drivers when working under bootable media. Even if

you configure system disk recovery in a Windows environment, the machine will reboot and recovery

will proceed in the Linux-based environment. Use WinPE-based media if the device is available in

Windows but Linux-based media does not detect it.

What if you do not have drivers

Windows 7 includes more drivers than the older Windows operating systems. There is a great chance

that Universal Restore finds all necessary drivers in the Windows 7 driver folder. So, you may not

necessarily have to specify the external path to the drivers. Nevertheless, performing Universal

Restore is critical so the system uses the correct drivers.

The Windows default driver storage folder is determined in the registry value DevicePath, which can be found in

the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion. This storage folder

is usually WINDOWS/inf.

Universal Restore settings

Automatic driver search

Specify where the program will search for the Hardware Abstraction Layer (HAL), HDD controller

driver and network adapter driver(s):

 If the drivers are on a vendor's disc or other removable media, turn on the Search removable

media.

 If the drivers are located in a networked folder or on the bootable media, specify the path to the

folder by clicking Add folder.

During recovery, Universal Restore will perform the recursive search in all the sub-folders of the

specified folder, find the most suitable HAL and HDD controller drivers of all those available, and

install them into the recovered system. Universal Restore also searches for the network adapter

driver; the path to the found driver is then transmitted by Universal Restore to the operating system.

If the hardware has multiple network interface cards, Universal Restore will try to configure all the

cards' drivers.

Mass storage drivers to install anyway

To access this setting, expand Show mass storage drivers to install anyway.

You need this setting if:

 The target hardware has a specific mass storage controller such as RAID (especially NVIDIA RAID)

or a fibre channel adapter.

 You recover a system to a virtual machine that uses a SCSI hard drive controller and is booted

into bootable media. Use SCSI drivers bundled with your virtualization software or download the

latest drivers versions from the software manufacturer website.

 If the automatic drivers search does not help to boot the system.

Specify the appropriate drivers by clicking Add driver. The drivers defined here will be installed, with

appropriate warnings, even if the program finds a better driver.

The recovery process

If Universal Restore cannot find a compatible driver in the specified locations, it will display a prompt

with the problem device. Do any of the following:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.5 Update 6 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info