Bedienungsanleitung Acronis Backup PC 11.5 Update 6 (Seite 127 von 248) (Englisch)

624431

127

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

For a machine running Windows, the %description% variable will be replaced by the text that

is given in the Computer description field of the machine. To specify this text, either go to

Control panel > System or run the following command as an administrator:

net config server /srvcomment:<text>

For a machine running Linux, the %description% variable will be replaced by an empty string

("").

 %subject%

The %subject% variable will be replaced by the following phrase: Task <task name> <task

result> on machine <machine name>.

5. In the SMTP server field, enter the name of the outgoing mail server (SMTP).

6. In the Port field, set the port of the outgoing mail server. By default, the port is set to 25.

7. If the outgoing mail server requires authentication, enter User name and Password of the

sender's e-mail account.

If the SMTP server does not require authentication, leave the User name and Password fields

blank. If you are not sure whether the SMTP server requires authentication, contact your

network administrator or your e-mail service provider for assistance.

8. Click Additional e-mail parameters... to configure additional e-mail parameters as follows:

a. From – type the name of the sender. If you leave this field empty, the messages will contain

the sender's e-mail account in the From field.

b. Use encryption – you can opt for encrypted connection to the mail server. SSL and TLS

encryption types are available for selection.

c. Some Internet service providers require authentication on the incoming mail server before

being allowed to send something. If this is your case, select the Log on to incoming mail

server check box to enable a POP server and to set up its settings:

 Incoming mail server (POP) – enter the name of the POP server.

 Port – set the port of the POP server. By default, the port is set to 110.

 User name and Password of the incoming mail server.

d. Click OK.

9. Click Send test e-mail message to check whether e-mail notifications work correctly with the

specified settings.

5.7.3 Error handling

These options are effective for Windows and Linux operating systems and bootable media.

These options enable you to specify how to handle errors that might occur during recovery.

Do not show messages and dialogs while processing (silent mode)

The preset is: Disabled.

With the silent mode enabled, the program will automatically handle situations requiring user

interaction where possible. If an operation cannot continue without user interaction, it will fail.

Details of the operation, including errors, if any, can be found in the operation log.

Re-attempt, if an error occurs

The preset is: Enabled. Number of attempts: 30. Interval between attempts: 30 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.5 Update 6 Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info