Bedienungsanleitung Acronis Backup PC 11.5 Update 6 (Seite 139 von 248) (Englisch)

624431

139

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

2. In the left part of the window, select the virtualization server. Use the right part of the window to

review details on the selected server.

[Only if the console is connected to the management server] If multiple agents manage the

selected ESX(i) host, you can choose the agent that will perform recovery. For better

performance, choose an Agent for VMware (Virtual Appliance) located on that ESX(i). If no agent

manages the ESX(i) and automatic deployment is turned on, Agent for VMware (Virtual

Appliance) will be deployed immediately after you click OK. Recovery will be performed by that

agent. It will take a license.

3. Click OK to return to the Recover data page.

To select the virtual machine type

1. Choose the Save the virtual machine as a set of files option.

2. In the left part of the window, select the virtual machine type. Use the right part of the window

to review details on the selected virtual machine type.

[Only if the console is connected to the management server] You can select the machine that will

perform recovery. This can be any registered machine where Agent for Windows or Agent for

Linux is installed.

3. Click OK to return to the Recover data page.

6.2.3.3 Virtual machine settings

The following virtual machine settings can be configured.

Disks

Initial setting: the number and size of the source machine's disks.

The number of disks is generally equal to that of the source machine. It might be different if the

software has to add more disks to accommodate the source machine volumes because of limitations

set by the virtualization product. You can add virtual disks to the machine configuration or, in some

cases, delete the proposed disks.

When adding a new virtual disk, along with interface and capacity, you can specify its format.

 Thin format. The disk occupies as much storage space as the data it stores. This saves the storage

space. To enable thin format, select the Thin provisioning (for ESX), or Dynamically expanding

disk (for Hyper-V) check box.

 Thick format. The disk occupies all the provisioned storage space. This improves the virtual

machine performance. To use thick format, clear the Thin provisioning (for ESX), or Dynamically

expanding disk (for Hyper-V) check box.

The default setting is thick format if a physical machine was backed up. When recovering from a

virtual machine backup, the software tries to reproduce the format of the original machine's disks. If

this is not possible, thick format is used.

Implementation of Xen machines is based on Microsoft Virtual PC and inherits its limitations: up to 3 IDE disks

and 1 processor. SCSI disks are not supported.

Memory

Initial setting: if not contained in the backup, it is the default setting of the virtualization server.

This is the amount of memory allocated to the new virtual machine. The memory adjustment range

depends on the host hardware, the host operating system and the virtualization product settings. For

example, virtual machines may be allowed to use no more than 30% of memory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.5 Update 6 Seite 139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info