Bedienungsanleitung Acronis Backup PC 11.5 Update 6 (Seite 182 von 248) (Englisch)

624431

182

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

10.6.1 Disk initialization

If you add any new disk to your machine, Acronis Disk Director Lite will notice the configuration

change and scan the added disk to include it to the disk and volume list. If the disk is still not

initialized or, possibly, has a file structure unknown to the machine system, that means that no

programs can be installed on it and you will not be able to store any files there.

Acronis Disk Director Lite will detect that the disk is unusable by the system and needs to be

initialized. The Disk management view will show the newly detected hardware as a gray block with a

grayed icon, thus indicating that the disk is unusable by the system.

If you need to initialize a disk:

1. Select a disk to initialize.

2. Right-click on the selected volume, and then click Initialize in the context menu. You will be

forwarded to the Disk Initialization window, that will provide the basic hardware details such as

the disk’s number, capacity and state to aid you in the choice of your possible action.

3. In the window, you will be able to set the disk partitioning scheme (MBR or GPT) and the disk

type (basic or dynamic). The new disk state will be graphically represented in the Disk

Management view of the console immediately.

4. By clicking OK, you'll add a pending operation of the disk initialization.

(To finish the added operation you will have to commit (p. 194) it. Exiting the program without

committing the pending operations will effectively cancel them.)

After the initialization, all the disk space remains unallocated and so still impossible to be used for

program installation or file storage. To be able to use it, proceed normally to the Create volume

operation.

If you decide to change the disk settings it can be done later using the standard Acronis Disk Director Lite disk

tools.

10.6.2 Basic disk cloning

Sometimes it is necessary to transfer all the disk data onto a new disk. It can be a case of expanding

the system volume, starting a new system layout or disk evacuation due to a hardware fault. In any

case, the reason for the Clone basic disk operation can be summed up as the necessity to transfer all

the source disk data to a target disk exactly as it is.

Acronis Disk Director Lite allows the operation to be carried out to basic MBR disks only.

To plan the Clone basic disk operation:

1. Select a disk you want to clone.

2. Select a disk as target for the cloning operation.

3. Select a cloning method and specify advanced options.

The new volume structure will be graphically represented in the Disk management view

immediately.

It is advisable that you deactivate Acronis Startup Recovery Manager (p. 235) (ASRM), if it is active, before

cloning a system disk. Otherwise the cloned operating system might not boot. You can activate the ASRM again

after the cloning is completed. If deactivation is not possible, choose the As is method to clone the disk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.5 Update 6 Seite 182

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info