624440
29
Zoom out
Zoom in
Vorherige Seite
1/248
Nächste Seite
29 Copyright © Acronis International GmbH, 2002-2015
Acronis Backup includes a handy disk management utility which enables you to perform the above
operations both under the operating system and on bare metal. To find out more about Acronis Disk
Director Lite, see the Disk management (p. 179) section.
3.8 Support for Advanced Format (4K-sector) hard disks
Acronis Backup can back up hard disks with a sector size of 4 KB (known as Advanced Format disks),
as well as traditional hard disks that have 512-byte sectors.
Acronis Backup can recover data from one disk to another as long as both disks have the same logical
sector size. (This is the sector size presented to the operating system.) Acronis Backup automatically
aligns the disk’s volumes (p. 110) if necessary. This way, the start of a cluster in the file system always
matches the start of a physical sector on the disk.
The disk management (p. 179) functionality of Acronis Backup is not available for disks with a 4-KB
logical sector size.
Determining the logical sector size
By disk specification
Development of the Advanced Format technology is coordinated by the International Disk Drive
Equipment and Materials Association (IDEMA). For more details, see
http://www.idema.org/?page_id=2.
In terms of the logical sector size, IDEMA specifies two types of Advanced Format disks:
512 Byte emulation (512e) disks have a 512-byte logical sector size. These disks are supported in
Windows starting with Windows Vista, and in modern Linux distributions. Microsoft and Western
Digital use the term “Advanced Format” exclusively for this type of disk.
4K native (4Kn) disks have a 4-KB logical sector size. Modern operating systems can store data on
these disks, but generally cannot boot from these disks. These disks are commonly external
drives with USB connection.
By running the appropriate command
To find out the logical sector size of a disk, do the following.
1. Make sure that the disk contains an NTFS volume.
2. Run the following command as an administrator, specifying the drive letter of the NTFS volume:
fsutil fsinfo ntfsinfo D:
3. Examine the value in the Bytes Per Sector line. For example, the output may be the following:
Bytes Per Sector : 512
3.9 Support for UEFI-based machines
Acronis Backup can back up and recover machines that use 64-bit Unified Extensible Firmware
Interface (UEFI) in the same way as it does for machines that use BIOS for booting.
This applies to both physical and virtual machines, no matter if the virtual machines are backed up at
a hypervisor level or from inside a guest OS.
Backup and recovery of devices that use 32-bit UEFI are not supported.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Acronis Backup PC 11.7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Acronis Backup PC 11.7

Acronis Backup PC 11.7 Installationsanweisung - Deutsch - 17 seiten

Acronis Backup PC 11.7 Bedienungsanleitung - Deutsch - 282 seiten

Acronis Backup PC 11.7 Installationsanweisung - Englisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info