Bedienungsanleitung Acronis Backup PC 11.7 (Seite 102 von 248) (Englisch)

624440

102

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Location

Details

Machine name

Local machine

Local folders

If the archive is stored in a local folder on the machine, expand the <Machine name>

group and select the required folder.

CD, DVD, BD

If the archive is stored on optical media such as CD, DVD, or Blu-ray Discs (BD), expand the

<Machine name> group, then select the required drive. First insert the last disc. Then

insert the discs in order starting from the first one when the program prompts.

RDX, USB

If the archive is stored on an RDX drive or USB flash drive, expand the <Machine name>

group, then select the required drive. For information about using these drives, see the

"Removable devices" (p. 149) section.

Network folders

If the archive is stored on a network share, expand the Network folders group, select the

required networked machine, and then click the shared folder. If the network share

requires access credentials, the program will ask for them.

FTP, SFTP

If the archive is stored on an FTP or SFTP server, type the server name or address in the

Path field as follows:

ftp://ftp_server:port _number or sftp://sftp_server:port number

To establish an active mode FTP connection, use the following notation:

aftp://ftp_server:port _number

If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.

After entering access credentials, the folders on the server become available. Click the

appropriate folder on the server.

You can access the server as an anonymous user if the server enables such access. To do

so, click Use anonymous access instead of entering credentials.

According to the original FTP specification, credentials required for access to FTP servers

are transferred through a network as plaintext. This means that the user name and

password can be intercepted by an eavesdropper using a packet sniffer.

5.1.1.2 Data catalog

Data catalog lets you easily find the required version of data and select it for recovery. On a managed

machine, the data catalog functionality is available through the Data view tab for any vault accessible

from this machine.

Acronis Backup may upload data catalog files from a vault to a local cache folder. By default, this folder is

located on the disk where the operating system is installed. For information about changing the default cache

folder, refer to the "Changing the default cache folder for catalog files" section.

Selecting the backed-up data for recovery

1. To access the Data view tab, navigate to Vaults view, and click the required vault.

2. In the Show field, select the type of data to display:

 Select Machines/disks/volumes to browse and search for entire disks and volumes in

disk-level backups.

 Select Folders/files to browse and search for files and folders in both file-level and disk-level

backups.

3. In the Display data backed up for field, specify the time period for which the backed-up data will

be displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.7 Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info