Bedienungsanleitung Acronis Backup PC 11.7 (Seite 105 von 248) (Englisch)

624440

105

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

The selected disks will be recovered to the physical disks of the machine the console is connected

to. On selecting this, you proceed to the regular disk mapping procedure described below.

New virtual machine

 If Acronis Backup Agent for Windows or Agent for Linux is installed.

The selected disks will be recovered to a new virtual machine of any of the following types:

VMware Workstation, Microsoft Virtual PC, Red Hat Kernel-based Virtual Machine (KVM), Red

Hat Enterprise Virtualization (RHEV), or Citrix XenServer Open Virtual Appliance (OVA).

The virtual machine files will be saved to the destination you specify in the Storage section. By

default, the new virtual machine will be created in the current user's documents folder.

 If Acronis Backup Agent for Hyper-V or Agent for VMware is installed.

These agents enable creating a new virtual machine on the virtualization server you specify.

By default, the new virtual machine will be created in the default storage of the virtualization

server. Whether you can change the storage on the virtualization server or not, depends on the

virtualization product brand and settings. VMware ESX(i) may have multiple storages. A

Microsoft Hyper-V server enables creating a new virtual machine in any local folder.

The new virtual machine will be configured automatically, the source machine configuration being

copied where possible. The configuration is displayed in the Virtual Machine Settings (p. 139) section.

Check the settings and make changes if necessary.

Then you proceed to the regular disk mapping procedure described below.

Existing virtual machine

Available when the Acronis Backup Agent for Hyper-V or Agent for VMware is installed.

On selecting this, you specify the virtualization server and the target virtual machine. Then you

proceed to the regular disk mapping procedure described below.

Please be aware that the target machine will be powered off automatically before the recovery. If you

prefer to power it off manually, modify the VM power management option.

Disks/volumes

Map automatically

Acronis Backup attempts to map the selected disks to the target disks as described in the "How

the automatic mapping works" (p. 106) section. If you are unsatisfied with the mapping result,

you can re-map disks manually. To do this, you have to unmap the disks in a reverse order; that is,

the last mapped disk should be unmapped first. Then, map the disks manually as described

below.

Disk #:

Disk # (MODEL) (p. 105)

Select the destination disk for each of the source disks.

NT signature (p. 106)

Select the way the recovered disk's signature will be handled. The disk signature is used by

Windows and the Linux kernel version 2.6 and later.

Disk destination

To specify a destination disk:

1. Select a disk where you want the selected disk to recover to. The destination disk's space should

be at least the same size as the uncompressed image data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.7 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info