Bedienungsanleitung Acronis Backup PC 11.7 (Seite 138 von 248) (Englisch)

624440

138

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

*Microsoft Virtual PC does not support disks that are larger than 127 GB. Acronis enables you to create a

Virtual PC machine with larger disks so that you can attach the disks to a Microsoft Hyper-V virtual machine.

With Acronis Backup Agent for Hyper-V or Agent for VMware, you can create a new virtual machine

directly on the respective virtualization server.

6.2.3.1 Steps to perform

To perform a recovery to a new virtual machine

1. Connect the console to the management server, to a machine where an agent is installed, or to a

machine booted from a bootable media.

2. Click Recover to open the Recover data (p. 99) page.

3. Click Select data (p. 100). Use the Data view tab or the Archive view tab to select the disks or

volumes to convert.

4. In Recover to, select New virtual machine.

5. Click Browse. In the VM/VS Selection (p. 138) window, select the resulting virtual machine type

or the virtualization server where to create the machine.

6. [Optional] In Storage, you can view or select the storage where the virtual machine will be

created.

7. [Optional] In Virtual machine settings (p. 139), you can change the name of the virtual machine,

the disk provisioning mode, the allocated memory, and other settings.

Machines of the same type and with the same name cannot be created in the same folder. If you get an

error message caused by identical names, change either the VM name or the path.

8. The destination disk for each of the source disks or source volumes and the MBRs will be

selected automatically. If required, you can change the destination disks.

On a Microsoft Virtual PC, be sure to recover the disk or volume where the operating system's loader

resides to the Hard disk 1. Otherwise, the operating system will not boot. This cannot be fixed by changing

the boot device order in BIOS, because a Virtual PC ignores these settings.

9. In When to recover, specify when to start the recovery task.

10. [Optional] In Task, review Recovery options and change the settings from the default ones, if

need be. You can specify in Recovery options > VM power management whether to start the

new virtual machine automatically after the recovery is completed. This option is available only

when the new machine is created on a virtualization server.

11. Click OK. If the recovery task is scheduled for the future, specify the credentials under which the

task will run.

In the Backup plans and tasks view, you can examine the state and progress of the recovery task.

6.2.3.2 Virtual machine type / virtualization server selection

Select the resulting virtual machine type or the virtualization server where the machine will be

created.

The available options depend on the agent(s) installed on the machine the console is connected to. If

the console is connected to the management server, you can choose any registered machine that is

able to perform the required operation.

To select the virtualization server where the new virtual machine will be created

1. Choose the Create a new virtual machine on the server option.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.7 Seite 138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info