Bedienungsanleitung Acronis Backup PC 11.7 (Seite 185 von 248) (Englisch)

624440

185

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Dynamic disk conversion: MBR to GPT

Acronis Disk Director Lite does not support direct MBR to GPT conversion for dynamic disks. However

you can perform the following conversions to reach the goal using the program:

1. MBR disk conversion: dynamic to basic (p. 186) using the Convert to basic operation.

2. Basic disk conversion: MBR to GPT using the Convert to GPT operation.

3. GPT disk conversion: basic to dynamic (p. 185) using the Convert to dynamic operation.

10.6.4 Disk conversion: GPT to MBR

If you plan to install an OS that does not support GPT disks, conversion of the GPT disk to MBR is

possible the name of the operation will be listed as Convert to MBR.

If you need to convert a GPT disk to MBR:

1. Select a GPT disk to convert to MBR.

2. Right-click on the selected volume, and then click Convert to MBR in the context menu.

You will receive a warning window, stating that you are about to convert GPT into MBR.

You will be explained the changes that will happen to the system after the chosen disk is

converted from GPT to MBR. E.g. if such conversion will stop a disk from being accessed by the

system, the operating system will stop loading after such conversion or some volumes on the

selected GPT disk will not be accessible with MBR (e.g. volumes located more than 2 TB from the

beginning of the disk) you will be warned here about such damage.

Please note, a volume, belonging to a GPT disk to convert, will be a logical one after the operation and is

irreversible.

3. By clicking OK, you'll add a pending operation of GPT to MBR disk conversion.

(To finish the added operation you will have to commit (p. 194) it. Exiting the program without

committing the pending operations will effectively cancel them.)

10.6.5 Disk conversion: basic to dynamic

You would want to convert a basic disk to dynamic in the following cases:

 If you plan to use the disk as part of a dynamic disk group.

 If you want to achieve additional disk reliability for data storage.

If you need to convert a basic disk to dynamic:

1. Select the basic disk to convert to dynamic.

2. Right-click on the selected volume, and then click Convert to dynamic in the context menu. You

will receive a final warning about the basic disk being converted to dynamic.

3. If you click OK in this warning window, the conversion will be performed immediately and if

necessary, your machine will be restarted.

Please note: A dynamic disk occupies the last megabyte of the physical disk to store the database, including

the four-level description (Volume-Component-Partition-Disk) for each dynamic volume. If during the

conversion to dynamic it turns out that the basic disk is full and the size of its volumes cannot be decreased

automatically, the basic disk to dynamic conversion operation will fail.

Should you decide to revert your dynamic disks back to basic ones, e.g. if you want to start using an

OS on your machine that does not support dynamic disks, you can convert your disks using the same

menu items, though the operation now will be named Convert to basic.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.7 Seite 185

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info