Bedienungsanleitung Acronis Backup PC 11.7 (Seite 192 von 248) (Englisch)

624440

192

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

10.7.3 Set active volume

If you have several primary volumes, you must specify one to be the boot volume. For this, you can

set a volume to become active. A disk can have only one active volume, so if you set a volume as

active, the volume, which was active before, will be automatically unset.

If you need to set a volume active:

1. Select a primary volume on a basic MBR disk to set as active.

2. Right-click on the selected volume, and then click Mark as active in the context menu.

If there is no other active volume in the system, the pending operation of setting active volume

will be added.

Please note, that due to setting the new active volume, the former active volume letter might be changed

and some of the installed programs might stop running.

3. If another active volume is present in the system, you will receive the warning that the previous

active volume will have to be set passive first. By clicking OK in the Warning window, you'll add

the pending operation of setting active volume.

Please note: even if you have the Operating System on the new active volume, in some cases the machine

will not be able to boot from it. You will have to confirm your decision to set the new volume as active.

(To finish the added operation you will have to commit (p. 194) it. Exiting the program without

committing the pending operations will effectively cancel them.)

The new volume structure will be graphically represented in the Disk management view

immediately.

10.7.4 Change volume letter

Windows operating systems assign letters (C:, D:, etc) to hard disk volumes at startup. These letters

are used by applications and operating systems to locate files and folders in the volumes.

Connecting an additional disk, as well as creating or deleting a volume on existing disks, might

change your system configuration. As a result, some applications might stop working normally or

user files might not be automatically found and opened. To prevent this, you can manually change

the letters that are automatically assigned to the volumes by the operating system.

If you need to change a letter assigned to a volume by the operating system:

1. Select a volume to change a letter.

2. Right-click on the selected volume, and then click Change letter in the context menu.

3. Select a new letter in the Change Letter window.

4. By clicking OK in the Change Letter window, you'll add a pending operation to volume letter

assignment.

(To finish the added operation you will have to commit (p. 194) it. Exiting the program without

committing the pending operations will effectively cancel them.)

The new volume structure will be graphically represented in the Disk management view

immediately.

10.7.5 Change volume label

The volume label is an optional attribute. It is a name assigned to a volume for easier recognition. For

example, one volume could be called SYSTEM — a volume with an operating system, or PROGRAM —

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.7 Seite 192

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info